Pitman Arm 69 Road Runner

[69RunnerMike]

Replacing Pitman arm on my Runner with power steering. The arm I bought has a different bend than the one I removed from my car. It fits the steering box shaft and the measurements seem to line up. Not that knowledgeable on steering components. Will this part work on my car?

 

[pnora]

As long as your turning left and right are ok you should be fine.

 

[BeepBeepRR]

One was made back in 68/69 with pride. The other was made by a 12 year old in china using legos as a cast. So as long as the sweep is the same it should be fine.

 

[dadsbee]

Here's my OE still on the box (or possibly a 70's CTC replacement) and my PST replacement arm I put on in 2017... both worked just fine.

 

[wagonman]

Just went through this with a manual to power conversion. It should work but you will probably need a toe set / alignment. Measure or just eyeball with the idler arm as long as they are the same good to go.

 

[Dale Lucy]

I just replaced the pittman arm on my 69 GTX, the original and replacement looked just like Dadsbee above. Works just fine

Dale

 

[69RunnerMike]

I just replaced the pittman arm on my 69 GTX, the original and replacement looked just like Dadsbee above. Works just fine

Dale

Thanks Dale. You've got a sweet ride!

 

[62Dart440]

If you’re still trying to find the exact replacement pitman arm, I got one from classic industries , the one from PST would not work with what I have. PST is on the left, classic is on the right.

 

[69RunnerMike]

If you’re still trying to find the exact replacement pitman arm, I got one from classic industries , the one from PST would not work with what I have. PST is on the left, classic is on the right.

View attachment 1473055

View attachment 1473056

I'm on that site all the time. Surprised that I didn't see it.

 

[62Dart440]

Glad I could help.