Post explosion, Parts are back

[dvw]

DuPont single stage urethane. Covered DP90 (black epoxy primer for those who don’t know) in 3 coats. The rest of the engine parts still look good after 9 years so no new paint for them.
Doug

 

[dvw]

Doug, if you get a chance, could you measure how thick the head is from where a lower headbolt seats to the deck surface? Mine were .868 inch also see if you can figure how thick the deck is by the large water passage on the end of the head? Mine are .250 thick. Not much!

The head bolt seats average .910". I don't have a tool that has a short enough throat to measure the deck thickness.
Doug