• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

power loss

mrmopar

Member
Local time
8:55 PM
Joined
Aug 22, 2012
Messages
11
Reaction score
3
Location
Loganville Ga.
I've lost power between the ignition switch and the battery?? One minute it was cranking and then not so much? It does nothing when I turn the switch.This is on the 1968..Help
 
Last edited:
check fusable link at bulkhead, then if thats not it...trace the wire on the bulkhead into the dash were it go's to the alt gauge.
 
Before you do any of that, pull both battery cables and clean the posts and ALL FOUR ends of the cables.
 
Auto Transport Service
Back
Top