Roadrunner column same as GM?

[FlyByWire]

Hey there fellas. Finally got my dream car (pics below). I’m wanting to swap out the steering wheel to something more fitting to the interior. Having a hard time finding a straight answer.

But.. 69 Roadrunner, tilt column. Are they the same spline count / size as a GM column when it comes to the steering wheel adapter? I’m wanting a Sparc wheel for it but the only options are GM essentially.

Thanks in advance.

 

[dadsbee]

Guess you'll have to determine what is in there, as no tilt column came in a '69 Road Runner.

 

[FlyByWire]

Guess you'll have to determine what is in there, as no tilt column came in a '69 Road Runner.

DOH!

Ok yeah that’s step one I suppose

 

[MarkLevi]

I doubt anyone here will be much help - the only thing I see in the interior pic that might be original is the rear-view mirror?
If even Chrysler, ...maybe the column is from C-body or Imperial?
Good luck. It's the nature of the beast with resto-mods.

 

[FlyByWire]

I doubt anyone here will be much help - the only thing I see in the interior pic that might be original is the rear-view mirror?
If even Chrysler, ...maybe the column is from C-body or Imperial?
Good luck. It's the nature of the beast with resto-mods.

I guess I’ll take a deep dive on the InterWeb on how to ID the column. It definitely doesn’t have the feel of a something new / aftermarket.

Thanks for your guys’ time.

And yeah there’s nothing really original left. Perhaps the current adapter is stamped with a part number eh?

 

[davek]

Nice looking car, your column might be a Flaming river column.

 

[MarkLevi]

MoMo steering wheel - maybe 365mm Certo? Possibly start with them to work backwards?
Chrome blinker/adjuster lever tips might make it an Ididit column?

spitballin'....

 

[s/w theo]

I bought a Flaming River column with tilt for a 63 Dodge I was building. The spline count & shaft diameter matched a Chevy steering wheel. I'm guessing because they are more popular, it's more than likely it's the same as a GM car. Best to do a spline count & measure shaft diameter to be sure.

 

[RemCharger]

IDDIT is fairly popular