Roller rockers, these any good?

[Malicious]

Hi all,

Came across these on eBay; any thoughts on the quality?

http://m.ebay.com/itm/291747787356?_mwBanner=1

 

[Hemirunner]

They're noisy. The thread tolerance is sloppy, the top land for the jamb nut is unmachined allowing the jamb nut to side load the adjuster. Can't imagine the heat treat on the adjusters is any good but I changed them out for Smith Brothers on the set I used. If you can't fix them yourself, just buy good ones and save yourself some grief.

 

[Mike67]

Don't know anything about them but the thought I have trouble with is what kind of quality are those for that $, and is worth the risk? I'm low budget but I have seen better quality ( cranes, comps) around $250-300...
Just an fyi I heard that the new "Speedmaster" brand is Procomp...

 

[Malicious]

Cheers guys, figured they'd likely be rubbish, but thought it would be worth an ask

 

[747mopar]

If they are no name brand run for the hills. I've had cheap rockers and the contact pattern is the big problem, I'm running Comp Cams stainless Magnum rockers and the pattern is spot on.

 

[Moparmatt72]

Know a guy on a bodies running some prw steel roller rockers and he runs the crap out of his body problems and has a small shot of nos on it, has them on a 408 small block but they also make big block rollers as well