Skinnies tire size

[kjalltrac]

Will put a set of 28x10.5 hoosiers slicks on my 64 belvedere this year.
I was wondering what a suitable front tire would be? Will the 28s rub?
Looking at 27 or 28x4.5 hoosiers.
Wheels will be 15x4 and 15x10 weld prostars.
Thanks.

 

[dvw]

I run M T 28 x 4.5 x 15 on my 64 they fit fine.
Doug

 

[RemCharger]

27.5 M/T here.

 

[kjalltrac]

I run M T 28 x 4.5 x 15 on my 64 they fit fine.
Doug

Do you know the back spacing by any chance?

 

[Al Alguire]

Mine are 28's

 

[dvw]

Do you know the back spacing by any chance?

15x4 with 1.625" back space. 3.375 to the outside. A 4" wheel measures 5" at the outside of the lips where backspace is measured. It's had 2 different style wheels with the same tires. I think the American's had even less back space like 1.5".
Doug

 

[malex]

Will put a set of 28x10.5 hoosiers slicks on my 64 belvedere this year.
I was wondering what a suitable front tire would be? Will the 28s rub?
Looking at 27 or 28x4.5 hoosiers.
Wheels will be 15x4 and 15x10 weld prostars.
Thanks.

View attachment 1789209

29’s also fit up front, is what I have on my 64

 

[kjalltrac]

Thank for your responses. Are there any advantages going bigger vs smaller front runners?

 

[malex]

Thank for your responses. Are there any advantages going bigger vs smaller front runners?

The larger diameter has more rollout and takes longer to break the beams. It’s supposed to help with red lighting but I’ve still done my fair share. Also, there’s loads of room for clearance on the 64’s, no issue there.

 

[RemCharger]

Also, the larger the tire, the more you can drop the front end, to give the suspension max travel

 

[kjalltrac]

Also, the larger the tire, the more you can drop the front end, to give the suspension max travel

Good point

 

[LemonWedge]

You can Use front tire diameter to tailor your rollout and control your reaction times.
I was finding myself on the late side of things recently, so I switched from 27.5” front runners to 26”, and that seemed to make about .015 difference in my RT’s.

 

[340runner]

You can Use front tire diameter to tailor your rollout and control your reaction times.
I was finding myself on the late side of things recently, so I switched from 27.5” front runners to 26”, and that seemed to make about .015 difference in my RT’s.

View attachment 1790999

So I understand how it affects rollout, but how can you use your front tires to control your reaction times?

 

[33 IMP]

Ta

So I understand how it affects rollout, but how can you use your front tires to control your reaction times?

Taller tires for more rollout and "quicker" times. Shorter tires for quicker reaction times, slower e.t.s, less rollout.
I have four sets of fronts/skinnies. 23"tall, 25" 26" and 29".
Too many redlights-taller tires
Too slow? Short tires. (Why Lemonwedge went to shorter tires, to improve his CAR'S reaction time.)

 

[RemCharger]

Ta
Taller tires for more rollout and "quicker" times. Shorter tires for quicker reaction times, slower e.t.s, less rollout.
I have four sets of fronts/skinnies. 23"tall, 25" 26" and 29".
Too many redlights-taller tires
Too slow? Short tires. (Why Lemonwedge went to shorter tires, to improve his CAR'S reaction time.)

I'm of a different opinion. Not what the difference of circumference will do to reaction time as well as tire pressure +/ and or/- staggered wheel alignment~going in sideways, younameit,,,,but cutting the light is all on the driver. Run after run rinse repeat

 

[33 IMP]

I'm of a different opinion. Not what the difference of circumference will do to reaction time as well as tire pressure +/ and or/- staggered wheel alignment~going in sideways, younameit,,,,but cutting the light is all on the driver. Run after run rinse repeat

Right.
But it's almost impossible to change your "cue" on a full tree, or your internal reaction time against a pro tree.
So, if I'm going . 495. .471, .489 , I'm gonna put on a taller tire and try to go .510'.530.
If I can only go .440s on a protree, I'm gonna change out 25s for 23s immediately.
Of course, there are MANY other adjustments that can be made as well.
(Shock settings, tire pressure, starting line rpm to name a few).