Speedometer housing

[jball1105]

I am struggling with the speedo housing on my 63 Sport Fury. The transmission is a T10 four speed. I ordered a speedometer housing for it (Threw a bunch of old parts away like an idiot). It is bullet shaped and nowhere near big enough to seal. The opening on the trans looks like it should have a flange on it and not just be a bullet. My understanding is the T10 was only used by Chrysler in some 63 models and I can't find very much info on if it is different than the GM applications. Any thoughts?

Thanks!

 

[pnora]

What is the inside diameter of the hole? What is the OD on that adapter?

 

[pnora]

I was doing some looking and I believe the part you need is made on to the cable. There was no adapter. Check with Brewers and they should be able to set you up.

 

[pnora]

Like this.

 

[jball1105]

I was doing some looking and I believe the part you need is made on to the cable. There was no adapter. Check with Brewers and they should be able to set you up.

So I should be looking for a new cable and not the housing? I’ll give brewers a call on Monday. Thanks!

 

[w.Hudson]

The part in your first pic looks like a Chevy piece. Looks very similar to what a 2 speed aluminum Power Glide transmission uses.

I would find a friend with an extra power glide and try that.

Years ago I bought that part from a transmission parts supplier called Transtar Industries. They called it a speedometer
bullet.
Another place to try is Whatever it Takes transmission parts.