SS Tubes Fuel Lines For Duel Feed Carburetors

[1971 Dodge R/T]

Has anyone ever used these fuel lines? If so are they for a Holley Double Pumper with two metering blocks? Or are they for a Holley vacuum secondary with a metering plate? I called SS Tubes and ask them and they could not tell me. They just said if they didn't fit they would might it right. I might just make my own but these are a pretty good deal.https://www.sstubes.com/products/rpc6611ss-66-74-mopar-b-body-holley-dual-feed-set-stainless

 

[Bee1971]

Holley double pumper fuel lines for Mopar


Email SS Tubes Sales a week ago

This part number RPC6611OM

Designed for a Double Pumper Holley with Dual Metering Blocks ?

And fits a Big Block Mopar 383/440 ?

Thanx Scott
Sent from my iPad

October 22nd response

Yes.

 

[1971 Dodge R/T]

Thanks Scott!

 

[beebest]

Several months late, but I used SS tube fuel lines yesterday on my 70 Road Runner. I think they look cleaner than the long braided line previous owner used. I used the steel verses the stainless as I thought they may seal better. Lines fit nice, but I still needed to tweak them with tubing bender. Did not need the small line as it did not fit my fuel pump, guessing it is line from pump towards vapor separator which I do not have. Also needed to purchase two holley adapters for carb, from 5/8 to 1/2.

 

[Bee1971]

Looks great

Thanx for the pictures

 

[RR Fan Dan]

That looks nice. I just redid mine to black braids and black AN fittings. Previous owner had silver red and blue. It looked the 4th of July under the hood. Wish I would have thought of that.

 

[Black_Sheep]

Not that hard to make using 3/8” line…

 

[oldbee]

Several months late, but I used SS tube fuel lines yesterday on my 70 Road Runner. I think they look cleaner than the long braided line previous owner used. I used the steel verses the stainless as I thought they may seal better. Lines fit nice, but I still needed to tweak them with tubing bender. Did not need the small line as it did not fit my fuel pump, guessing it is line from pump towards vapor separator which I do not have. Also needed to purchase two holley adapters for carb, from 5/8 to 1/2.

View attachment 1784907

View attachment 1784908

View attachment 1784909

Almost done with 2nd RR? I need to stop by(when it warms up!).

 

[beebest]

Almost done with 2nd RR? I need to stop by(when it warms up!).

No where near, thinking about pulling motor in the spring, on occasion I can hear a slight knock. If I pull motor Ill probably change color of car. Lol
Is your super bee all back together?