What am I missing?

[dspur]

1969 Dodge Super Bee w/ factory air…
See pic….Is there a flex duct that goes between these in the middle ac vent (Rallye dash)? If so where could I source?
I have new duct for the end vents, could buy online. Have not seen what would bridge the gap here. TIA.

 

[davek]

do you have this one?

 

[dspur]

do you have this one? View attachment 1632045

I do not. How would the round end hook up? Both ends I have are rectangle. Am I looking at this wrong? Thank you for your input!

 

[Fran Blacker]

A 69 service manual or a parts book may help with what the part looks like. Parts book has an exploded view of about every system, even ductwork. Ljnk where you download either, on a PC is best. Service Manuals – MyMopar Go main page to find parts book.

 

[dspur]

I think I have one. I’ll check it out. Thanks.

 

[LowBikeMike]

You're not missing anything. Those two pieces just fit together, piece on left button up against center vent. Pretty sloppy fit.

 

[dspur]

You're not missing anything. Those two pieces just fit together, piece on left button up against center vent. Pretty sloppy fit.

Very sloppy, that is what is throwing me off...

 

[1 Wild R/T]

The foam is supposed to create a seal with the piece that connects the center vent registers..
The piece Dave posted connects to the round outlet on the left side of the plenum & travels over the steering column then a flex duct connects to the drivers side lower dash vent..

 

[dspur]

The foam is supposed to create a seal with the piece that connects the center vent registers..
The piece Dave posted connects to the round outlet on the left side of the plenum & travels over the steering column then a flex duct connects to the drivers side lower dash vent..

Thanks. I'll look into sourcing that part.

 

[1 Wild R/T]

We use to say these cars will nickel & dime ya to death.... These days we wish there was a part to be had for a nickel or a dime...

 

[dspur]

We use to say these cars will nickel & dime ya to death.... These days we wish there was a part to be had for a nickel or a dime...

now it is $50 and $100 to death, and then some..

your post cleared things up for me, I sourced that part on Ebay and ordered it, about $40 with shipping....there were some of the same thing on there for $100 plus

many thanks for the help! Got all those parts now....I think lol

 

[eldubb440]

500 and 1000

 

[dspur]

500 and 1000

true that!

 

[1 Wild R/T]

Does take a lot of the fun out of the hobby... We use to build these cars on a budget... Not you need to budget for parts..

 

[Kilrbee]

There is another piece of foam that you are missing in the pic that goes around the outlet opening also. Detroit Muscle has both of the required foam pcs available new.

 

[dspur]

There is another piece of foam that you are missing in the pic that goes around the outlet opening also. Detroit Muscle has both of the required foam pcs available new.

Yes I have both. Thanks. I ordered an entire kit from DM some time back and forgot that I had it. I have all the pieces of that puzzle now thanks to the good advice on this forum.