Wrong Part Again, Damn!

[vanrj1]

The problem with collecting parts over the course of 7 years is when I go to use something I bought 4 years ago, (radiator) in this case, it is for a 65 C body and it was listed for a 65 coronet. I guess I need to not take the word of the person selling it. This happened to me on about 4 parts now. I learned my lesson now.

 

[MarPar]

awww crap! that sux. it should work for you...going to need a c body shroud though

not 100% on this one. early b guys are sure to chime in...

 

[Ron 73]

That does suck and ill be the first to admit ive trusted someones word and it wouldn't help me any.. Im constantly being told by my family that i put way to much trust in people, but ive learned as well a few things from my past that ive changed.. Ive been able to get my money back and them there part, but to many times once done, you cant seem to get ahold of them.. It works both ways with me though, if i don't think something will work for who ever, i tell them to make sure, double check, i don't want to be accused of selling something i knew wouldn't help them. i do understand you didn't need the part at the time you bought it so hope it works out.. Good luck.

 

[70RR]

Mis-leading

How many people list stuff for sale with the word " HEMI " in the listing ? Just to get you to look and has nothing to do with a Hemi ?? :eusa_think:

The problem with collecting parts over the course of 7 years is when I go to use something I bought 4 years ago, (radiator) in this case, it is for a 65 C body and it was listed for a 65 coronet. I guess I need to not take the word of the person selling it. This happened to me on about 4 parts now. I learned my lesson now.

 

[Bruzilla]

They do it because it works, as evidenced by people looking at the ads.

 

[vanrj1]

awww crap! that sux. it should work for you...going to need a c body shroud though

not 100% on this one. early b guys are sure to chime in...

Well the lower outlet on this radiator has a larger diameter hose fitting then the one on my water pump, this is the main issue. The hose would need 2 different size ends, and the top hose comes off the far passanger side instaed of the middle and I just don't like how it would look.