• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. lonewolf73

    360/727 engine/trans ?

    hi all thank you for the info on the motor an trans I end up not getting it there was to much work to do on it well that least to much for my budget again thanxs for the help
  2. lonewolf73

    360/727 engine/trans ?

    hey all its been awhile since i put anything in here but 1st i want to say happy new year 2 all i have a ? but a engine an transmission 1st its a 360 motor which i know will work in my 73 charger but what i want to know is it has a 727 trans an from the ad it says its out of a 74 B300 which...
  3. lonewolf73

    headlights help

    Hi all I bought a hid headlights low beam haven't bought the high beams yet, but the hid that I got are plug an play that plug into your old wiring but I wanted to put in a relay so I got the plug an I was wandering since it has 3 wires coming out of it how do I connect it to the relay I know...
  4. lonewolf73

    wanted door latch driver side 1973 charger

    the date on the door says 2-73
  5. lonewolf73

    wanted door latch driver side 1973 charger

    hi im lookin for just the door latch for 73 dodge charger im not sure what other yrs will work.
  6. lonewolf73

    Fremont Show announced

    my buddy an i will be there this sunday
  7. lonewolf73

    torsion bar ?

    Hi all I was wandering if any1 knows if there is a differents between a 1972 charger torsion bar an a 1973 torsion bar cause I just placed an order for some torsion bar from P-s-t which I guy that took my order said they don't have 73 charger torsion bars an didn't know anything about the new...
  8. lonewolf73

    where can i get front suspension bushings that r polyethane for 1973 charger

    ive checked classic industries they don't have it I looked up on p.s.t. website an no go jegs an summit but no1 has them for a 73 charger. I really didn't want to put stock bushings back on. if any1 has any info plz let me know an thxs for the help.
  9. lonewolf73

    tranny 904 problems

    Hi all I have a problem with my 904 tranny when i drive the car most of the time it slips into neutral for a sec it doesnt happen to much but i had take it to a tranny shop an they test drove it when they came back they said that when it shifts when in drive at say a stop light that from 1st to...
  10. lonewolf73

    Shift linkage, A/T transmission floor shift

    with the above ? in mind i have a column shift linkage i was wandering if the 1 rod that i have now that hooks to the piece goin from the tranny to the subframe will that rod work ?
  11. lonewolf73

    Shift linkage, A/T transmission floor shift

    Ya thats where i found all but the 1 piece at is on ebay just got the upper rod linkage or waitin for the guy to sented it to me. theres the middle piece that goes through the floor an the piece that goes on the tranny i even found the column bushing an spring on there too.
  12. lonewolf73

    Shift linkage, A/T transmission floor shift

    Sorry all i for got to say its for a 1973 charger
  13. lonewolf73

    Shift linkage, A/T transmission floor shift

    Hi all I was wandering if any1 knew where i can find the 1 linkage between the tranny an the the piece that goes through the floor Im tryin to change my column shift to a floor shifter.I have found the upper middle pieces along with the piece that goes on the tranny but to make it work i need...
  14. lonewolf73

    amp meter shows discharge

    sorry it took so long to get back here but it ended up being a ground wire that i had missed
  15. lonewolf73

    amp meter shows discharge

    Hi all i have a 73 charger that i replaced the alt. an the v reg. an on the amp meter in dash shows a discharge instead of charge an when i put the headlites on or push the brakes or the turn signals on or put all of them on it goes to all the way to discharge i have checked all the grounds had...
  16. lonewolf73

    fried wire

    lol well i figure since its hard enough to fine parts at a reasonable price if u can fined the parts that is a push button start is goin to have to do for now thxs for the help i do have another problem with my horn is my turn signal but also is my signal still works as a signal but i...
  17. lonewolf73

    fried wire

    well figured out that i can start the car the a screw driver so i guess what im goin to do is put a push button in an start the car that way think that its the ignition switch is shot
  18. lonewolf73

    fried wire

    the block battery ground is good an the block to frame is good yes it is clicking an not turnin over i had the bat. checked an its good no dead cells an holdin a charge
  19. lonewolf73

    fried wire

    could it be that my Electronic Ignition Module went bad ?
Back
Top