Search results for query: *

only one in the rear of mechenisim. it looks like an after market with the hurst name on it

I lined up the shifter with the pin. I put all three gears in neutral. I installed the linkage. when the car is standing still all the gears seem to shift okay. when i start to move I have no 1st or 2nd gear. feels like its going into gear but nothing. I took the linkage off the 1st & 2nd gear...

how did you make out? i have a 68 charger 383, the front of the car droops its too low. the torsion bars a re stock. If i install the 1.100" do you think it will help with my ride height? i screwed the adjuster screws in all the way and it still rides too low. Last thing. the greese fittings on...

68 charger torsion bars question. The front of my car droops like a soup sandwich. I adjusted the screws all the way up and its still too low. If I install 1.12" 0r 1.14" torsion bars will that help rais the fron of my car? Also the greese fittings on the idler arm and oitman arm hit the...

My ride height is very low. even when I set the adjuster screws all the way up will the 1.14" torsion bars help raise the front of the car? 68 charger RT

Where did you buy the #4 arm? my iddler arm grease fitting (90 degree) hits my torsion bar. 68 charger 383 engine

the self adjuster goes to the front of the car? how about the rear drum self adjusters? do they go to the front of the car as well?

I have a 68 charger. when i bought the car the drums, shoes & hardware were all gone. after reading some posts i figured they are 11 x 2-1/2 im not sure if they were manual adjusters or self adjusters. how do i find out? if they were manual adjusters can i upgrade to self adjusters?

I have a 68 charger, the rear drums, shoes and all hardware was gone when i bought the car. I think they are 11 inch (i compared them to a set of 10 inch) I measured the backing plate is 1 -3/4 inch 11 x 2-1/2 drums and shoes ( i think) 1. if i want 11 x 3 shoes and drums do i have to change the...