Search results for query: *

are elgin junk for sure? I'm in the market for stock type rockers and 440source has some made in the USA but they say they are made by elgin so now I'm really confused. also apparantly elgin is made by sealed power?

Is there a way to verify the HP spring? I been getting returned junk from rock auto lately and I got the HP pump but it makes a rattling sound when I shake it. Its not the pressure release cause I removed it to test. I heard the spring should have a purple paint code I see nothing. mine looks to...

I am considering the 268 cam and the 911 springs on my 383 build. I have 516 heads. Can the spring pads be ground to make 1.90 height? does this effect the stock pushrod length? https://www.forabodiesonly.com/mopar/threads/valve-spring-installed-height.551940/#post-1974510089 I half answered...

any more info on these?

when I was towing, my boss would change the filter but leave the oil till next go around. I didnt like it but it wasnt my job to

My 383 cam that was the original looked just like yours. I think from rust pitting after sitting for years

what a nightmare. Imagine the bill for that

what I read is the metal has more silicon in it 11%? and the heat expansion has been reduced because of that. but 30 years ago? they do like reintroducing old stuff as "new tech" so who knows

ok thanks. I see they have 1.920 comp h they only list them for 68 up not 66. is there something about that I should look into? thank you for the fast reply!

just reading this thread. can I used L2315 pistons in a 66 383 and 516 heads?

what would you reccommend for a 383? I need a single bolt cam. thanks!

this notch? I dont see any new bearing online with it...which is annoying

Could anyone please help me over here? https://www.forcbodiesonly.com/mopar-forum/threads/1966-383-516-heads-what-pistons.83688/

I wanted a clear image of the coolant temp switch. I was running back and forth to KMS to cough up $10 a socket. I thought it was 7/8 it wasnt I was hoping for a quick answer. All I needed was the socket size not off topic criticism So its 15/16 if anyone ever needs to know in the future. I...

well you're half right. :)

it was 15/16 it was too tight to get a wrench on it with the heater hoses and such. I got it done though thanks

my 66 has 2 tank breather tubes and 1 is in the trunk...I smell it

socket that fits? its not 7/8

thanks

I put the green bearing in and have had no problems at all. I will probably put barely 500 miles on it a year so I hope I'm good