3 inch tubs

[John Love]

Hi I wanted to share my experience in doing 3 inch tubs to fit 29x15x15 mickey thompson sportsman sr tires so this is what you have to do, it's not just adding 3 inches to the wheelhouse, you have to cut and modify the wheel house at the quarter panel also because of the tire height and I ended up shortening my rear end 1 inch on each side to give me proper clearance, so if anyone tells you different then good luck

 

[rickseeman]

Is that those inner tubs made by AMD or whoever it is?

 

[SimoHoss]

Can you provide the before and during pictures. I am doing that exact 3" inner wheel well now. Thanks

 

[Belvedere408]

Turned out fantastic

 

[Belvedere408]

Is that those inner tubs made by AMD or whoever it is?

US car tool makes some.

 

[6PKRTSE]

I did the same on my Challenger with the mini tub to the frame rails, not on my Chargers though, yet. I am able to run a 315/60/15 Drag Radial or a 29.5x10.5W slick with room to spare with either tire on the Challenger.

 

[eldubb440]

that's a nice install.......

 

[John Love]

Can you provide the before and during pictures. I am doing that exact 3" inner wheel well now. Thanks

No I made my own

 

[stage3]

No I made my own

View attachment 1718904

View attachment 1718905

been there done that.

 

[JC Boatguy]

No I made my own

View attachment 1718904

View attachment 1718905

Well done!!!