dadsbee
Well-Known Member
- Local time
- 5:08 PM
- Joined
- Jan 29, 2018
- Messages
- 21,135
- Reaction score
- 73,863
- Location
- Midland Ontario, Canada
I can wire my 4 post either way. My 2 post I ran a 240 dedicated for it, the only voltage that motor can use. Was easiest just to plug my 4 post in on a 120V cord, especially since you can roll it around to a different location if required.Power wise, how many of you have lifts that are 220V, as compared to 110V ? My 2post Bendpac is 220V...