66/67 Coronet/ Charger fender nose section.

[Brandy]

Hey guys, do anyone have a wrecked left fender on which the front nose section is good? I need a hunk of one to sew up my fender mod. PM me if you can help, thanks. Here's a couple of pics showing what i'm up to and the section I need.

View attachment 305941View attachment 305942

 

[bevholds82]

I aint interested in a Coronet, a roadrunner yes.

 

[TUFCAT]

On 67 Coronets, its part of the grille surround. Those grille surrounds are expensive too. It could be a separate piece of a Charger? I never paid that close attention.

 

[Brandy]

How nice for you...

I aint interested in a Coronet, a roadrunner yes.

- - - Updated - - -

I don't need the chrome surround, I need the section of fender side that is missing in the picture. I have placed a 66 Charger front grille and hidden headlights in my 67 Coronet. I swept the angled nose section of the fenders back to 90 degrees with the fender. I need the 2 inch strip that is missing in the pic.

On 67 Coronets, its part of the grille surround. Those grille surrounds are expensive too. It could be a separate piece of a Charger? I never paid that close attention.

 

[bevholds82]

Well what should have I said?

 

[gdrill]

Well what should have I said?

How about nothing? Obviously you don't have the chunk he is after.

Ghostrider I will look at my stuff. I have a few spare rough fenders. Shipping may not be worth it but if I have the piece you need I'll cut it out and you can have it.

 

[bevholds82]

I don't have ANYTHING,I'm looking for a manual 70 roadrunner.

 

[gdrill]

Well post a want ad in the for sale forum. You'll have better luck there than here.

 

[Brandy]

LOL,,,....thanks gdrill, not to sure what the other person was trying to say there....is he trying to buy a fender, a car? Or is he not interested in selling a Coronet fender and will only sell Road Runner ones? I don't understand. Anyway, thanks for looking pal, I can make what I need but would rather have that stock curve and nose flange to work with. let me know!

 

[bevholds82]

What don't you understand about LOOKING for a 70 roadrunner? Not selling and not male.

 

[gdrill]

Repeat.......Well post a want ad in the for sale forum. You'll have better luck there than here. This a thread asking for a part not selling a roadrunner. Understand?

 

[bevholds82]

I'm not stupid.

 

[Brandy]

Hey bevholds 82, not saying your stupid and sorry for assuming your a guy. Your reply just did not make sense to me in the context of my post. I'm looking for a part for a 67 Coronet. You seem to be looking for a 70 Road Runner car? As gdrill said you would have better luck by posting in the WTB Mopar cars and parts forum where those who may have this model are looking for buyers. So, good luck with your search and welcome to FBBO lady!

 

[YY1]

I think I have one.

I've got a couple 66 Coronet fenders that are rusted in the dog leg and/or the cowl gap area.

You say you need 2 inches from the grill surround area?

That shouldn't be too much to ship.

I'll try to get to my storage shop and get some pics.

I need to reorganize that area of parts storage anyway, and getting rid of a fender that I saved pretty much only for that area will be a good motivating factor.

- - - Updated - - -

Driver's side correct?

 

[Brandy]

What I would like is to have is for someone to take a saws all and slice straight down through the fender, top to bottom by measuring from the front end back 12 inches and cut down. Need inside and outside. The cut should pass down in front of the panel that connects to the inner fender by the radiator support. Thanks! I'm happy to pay for shipping.

I think I have one.

I've got a couple 66 Coronet fenders that are rusted in the dog leg and/or the cowl gap area.

You say you need 2 inches from the grill surround area?

That shouldn't be too much to ship.

I'll try to get to my storage shop and get some pics.

I need to reorganize that area of parts storage anyway, and getting rid of a fender that I saved pretty much only for that area will be a good motivating factor.

- - - Updated - - -

Driver's side correct?

 

[YY1]

I got pics.

I'll post them on my break.

Your section is roughly 24x24x16.

Not good on guessing weight but I put in 20 pounds and picked a random VT zip code.

USPS regular post is $42-ish shipping.

 

[Brandy]

05769 zip Package it up and give me dimensions and finished weight along with your address and zip and i'll e-mail you a label if you give me your e-mail. Or I am going to PM you with my info and you can print the label and tell me how much it is. Either way.

 

[gdrill]

I see YY1 has offered up the piece. That's probably a good thing because the 2" strip wouldn't have been too bad but the bigger chunk will be outrageous shipping across the stupid border! Let me know if it doesn't work out though and we'll check into it.

 

[Brandy]

I will gdrill, and thanks.

I see YY1 has offered up the piece. That's probably a good thing because the 2" strip wouldn't have been too bad but the bigger chunk will be outrageous shipping across the stupid border! Let me know if it doesn't work out though and we'll check into it.

 

[YY1]

I had three passenger side and only one driver side...and of course the driver's side is the best of the bunch.

Actually it could be used as a complete fender if absolutely necessary. Kind of pains me to cut it...

Here's some pics- I marked a line where the 12" from the nose falls in blue sharpie.

I can drill off the headlight buckets to save a little weight.

I also drew arrows pointing to some minor rust. Not in easily seen areas, though.

The 12" mark falls after the headlight support/core support bracket.

Cutting in front of that would save a lot of weight and size.

I'll run shipping both ways with your actual zip when I get home, and pm you those.