72 Satellite full trunk floor will it fit

[Babyblue66]

Can I fit a full trunk floor through the trunk opening on a 72 satellite? I'd rather buy a one piece and use that versus a two-piece if I can.

 

[MWbirdLOVER70]

I think it’d be very tight. Most do that when replacing quarters but with quarters you’d do better cutting in half. Either way your gonna have plug weld marks

 

[Babyblue66]

So you don't know if it will fit through the trunk opening.

 

[MWbirdLOVER70]

So you don't know if it will fit through the trunk opening.

To be honest No. you could get measurements thou

 

[Grabbergreendream]

I fit a full trunkpan removed from a 73 RR into my 71 RR. It is tight but will slide through the opening with a little persuasion.
Good luck.

 

[5.7 hemi]

I couldn’t get a full trunk pan in my uncle’s 70’ RR, so I cut it down the middle. Can’t tell I cut it cause I ended up welding both sides.

 

[Babyblue66]

I couldn’t get a full trunk pan in my uncle’s 70’ RR, so I cut it down the middle. Can’t tell I cut it cause I ended up welding both sides.

70 is a totally different body. Not relevant comparison

 

[5.7 hemi]

Unless you can a whole pan in there, you’re gonna need to cut it, which is relevant.

 

[dsd1967]

You should be able to measure the opening and compare that dimension to the floor from seam to seam at the drop offs.

 

[71Beeper]

Babyblue66 - a full trunk pan will definitely slide in thru the trunk opening on a 1971/1972 Satellite/Roadrunner.
I've done it.

This was done back in 2017.

 

[RemCharger]

Luckily you don't have to roll it up!

 

[MWbirdLOVER70]

Babyblue66 - a full trunk pan will definitely slide in thru the trunk opening on a 1971/1972 Satellite/Roadrunner.
I've done it.
View attachment 1578444
This was done back in 2017.

There you have it, my bad