74 Charger Rallye 440 TX9

[T2R9]

Looks great! I wonder if they make the turquoise for the 66s? I'd like to dress up the engine in my coronet, but that will be when I rebuild it at the end of the season.

Not listed on their site. Just Hemi Orange, Red, and blue for Mopar.

 

[T2R9]

Had to fix the broken studs in the drivers exhaust manifold so I can use the factory heat shield. PITA, 1/4-20 in cast iron. Was able to get them drilled out with a #8 drill bit then tapped them to clean em up. Was really handy to be able to bolt the manifold to the press. $180 was well spent on this 70's vintage drill press. Also got the exhaust studs installed on the engine. Really happy with the paint, looks even better after setting up.

 

[eldubb440]

I trash picked my drill press, needed a motor...... I don't need it often; but is comes in handy......I had an old motor (40s maybe?) laying around; it spins the Wrong way; I made the belt do a figure 8..... I smell rubber every time I use it; been that way for about 20 years....but it works