750 Holley with Performer Intake?

[Mopar-Charger]

Title says it all, can I put a 750 holley on my Edelbrock intake?

The old 600 isn't doing enough so I decided to upgrade, I wouldn't expect to see a difference but just to make sure I'll run it past you guys.

Thanks!

Jake

 

[Uberbricky]

Is your intake a square or spread bore? If it's spread bore, you can get a spacer or plate and it will work. Direct bolt on if it's a square bore.

 

[Xp29h]

I had a performer intake that did have a 650 and then a 750 on it. So should fit fine 4150 or 4160.

I changed intakes as the performer states it's a stock replacement so I went with a different one, tm6 (for 383) works fine and still accepts both holley models. However I know the performer works well for some situations.

Good luck.

 

[Mopar-Charger]

It's the spread bore but has two bolt patterns? That should work right?

 

[WP29440SE]

It's the spread bore but has two bolt patterns? That should work right?

did you measure the distance between the holes on the intake and then the carb? pretty simple eh? that's how they used to do it back in the day before the internet

make sure the butterflies will open all the way before you bolt it down

yes it will fit