Anodized coating removal

[dan juhasz]

I googled and read about methods, most popular hits was for ez off oven cleaner (yellow can) . Second method that was popular was lye cut with water but no specific instructions.
What is the best method that you guys have used?

 

[T2R9]

I use the Easy Off. Soak, scrub with a scotch bright, rinse.

 

[DeltaV]

 

[dadsbee]

Todays Easy Off won't do it... at least not the crap we have up here. Covered in my Super Bee restoration thread... Lye crystals and water. Line a box with a sheet of 6 mil plastic and have at it.
1969 Dodge Super Bee Coupe Restoration

 

[T2R9]

The Heavy Duty in the yellow can works just fine, just bought some a month ago.

 

[MarPar]

The Heavy Duty in the yellow can works just fine, just bought some a month ago.

'Murica! lol

 

[AR67GTX]

Easy Off is a real pain and can damage aluminum pretty seriously. What I’ve been using is Lye for cleaning drains, etc. It works quickly (20-30 minutes). You need a pan to soak the part in. A pvc tube works fine for long trim or possibly a 5 gallon bucket. I have a sheet metal pan about 4’x1’x6” for some pieces. I use 12 - 16 teaspoons of lye per gallon of water, typically 12. Don’t leave the parts in too long, even some light anodizing still showing is not typically a problem as it is usually so degraded that it sands right off. Typically, after washing you have a smooth surface while Easy Off will erode, pit and scar up the surface in worse cases to where you have to start sanding with 120 or 180 sometimes. Depending on the amount it can be flushed as essentially it’s drain cleaner.

 

[Krooser]

Laquer thinner

 

[AR67GTX]

Laquer thinner

Now that’s one I’ve never heard.

 

[dan juhasz]

Laquer thinner

Can you elaborate

 

[dadsbee]

Can you elaborate

Yes please, I'd like to hear this one as well!

 

[It’s just me]

Yes please, I'd like to hear this one as well!

Drink a big glass of it and watch it melt away?

 

[MarPar]