cr8crshr
Well-Known Member
- Local time
- 2:49 PM
- Joined
- Feb 13, 2009
- Messages
- 7,117
- Reaction score
- 13,070
- Location
- Northwest Nevada
I am not degreed but I do have a DD214!!! cr8crshr/Bill
One in particular that immediately comes to my mind. Kind of can't believe he hasn't spouted off all his degrees on this thread yet. Probably sitting in a corner somewhere counting all his money.....There's a few guys around here that act like they are brain surgeons!
For the one underground in Switzerland? Check out that hideous typo on the headline - for real that was on TV.While he was at Syracuse university he designed and built fixtures for a particle collider.
yes the one in Switzerland.For the one underground in Switzerland? Check out that hideous typo on the headline - for real that was on TV.
View attachment 1747202
Gots one of dem too....like lots of others here do! And depending on what you had to do, getting that could be a feat in itself.I am not degreed but I do have a DD214!!! cr8crshr/Bill
My brother in law was a geologist and was the same way. He also had 'learnin' in engineering and tried to over engineer everything he did. His IQ was pretty high and was the same way about 'things'......couldn't find stuff let alone 'can't get there from here stuff. There was the day he thought he could 'rake' the yard using my gas blower (not a large one) and after burning 3 tanks of gas, he finally sat down for a smoke break and that's when I walked out to the front yard and grabbed the blower. It never ran quite the same after that. He was using the blower because he was living with us and thought he was helping out. One attribute is that he didn't talk down to others so that made conversing with him a joy....most times lol.My older son has a master's degree in physics. His interest is in high energy stuff.
While he was at Syracuse university he designed and built fixtures for a particle collider.
Now he works for the university of Rochester in the laser lab where he's in charge of the targets.
Very bright but can't find his shoes occasionally.
How tight were the tolerances? The refinery I worked at had a lapping room for lapping seals etc in the machine shop that measured in light bands. It wasn't hard to do until someone came in and used the lapping tables without knowing how to used them and that's where the work was in getting them straightened out again.yes the one in Switzerland.
He would have to explain what parts he designed and built.
But it was pretty intricate stuff with unbelievably tight tolerances.
They had to build a clean room as part of the project.
I've done home stuff and wired my shop myself....110 and 220. Rather not do it though lol.I’m just a electrician
There's "dregs'' in all walks of life. I've worked with all kinds of people and plenty of "dregs" too and there were times that I'd pick working with the "dregs" over the 'eddycated' aholes. Besides, I've met several that acted like they were "dregs" but were actually good people and educated too.A I'm working with the dregs of society and I have to keep their loyalty and their respect.
What's the answer to the upcoming Mopar Giveaway?I have a degree in real life experience, ask me anything