Until this starts production.But it's made in america so it's great!
Chinese copy of Edelbrock RPM intake?
- Thread starter ChargerST
- Start date
not so famous bob
Well-Known Member
looks just like it !!
I saw a brown one a couple days ago. It literally looked like crap. (in more ways than one)
icetech
Well-Known Member
whats where is you see them online and it's like WOW that is ugly.. then in person it's like HOLY ****.. that's SOOO ugly, it's just another level in person.. there is a guy here that drives one in petty blue... it's horrificI saw a brown one a couple days ago. It literally looked like crap. (in more ways than one)
That video didn't mention anything about producing cars.
Just battery storage units for electrical systems.
Components!
This is cool and informative:
16 September 2020
How Edelbrock makes its signature aluminum intake manifolds - Hagerty Media
How Edelbrock makes its signature aluminum intake manifolds
Brandan Gillogly16 September 2020
How Edelbrock makes its signature aluminum intake manifolds - Hagerty Media
icetech
Well-Known Member
It's cool cept when they drill all the holes to mount the intake in the wrong spots and you have to grind out a $400+ intake to make it fit the engine... my RPM was like that and i believe it was PBR that got 3 victor intakes with the same issue....
I will never not be pissed bout this
For me I actually hit the swap meets and local ads for used aluminum intakes. I found a nice one for my 360. Plus I found a spare locally for a good price. After a good cleaning, bead blasting and hi temp paint, it looks and performs great.
And I don't blame you. There is no excuse for poor quality control. Someone someone didn't care that day and made it wrong. It shouldn't have been boxed and sent out. Rework or melt it down and recast and correct the mistake immediately. No excuses.I will never not be pissed bout this
So much for quality controlIt's cool cept when they drill all the holes to mount the intake in the wrong spots and you have to grind out a $400+ intake to make it fit the engine... my RPM was like that and i believe it was PBR that got 3 victor intakes with the same issue....
I will never not be pissed bout this
- Local time
- 12:58 AM
- Joined
- Mar 14, 2012
- Messages
- 19,171
- Reaction score
- 39,664
- Location
- Surrey, B.C. Canada
There are hundreds of car companies over there, China is the country with the largest automotive industry in the world. GM helped out when they started building Buicks over there in 1997. They now also build Chevrolet and Cadillac in China.
Meanwhile, Stellantis used to make Jeeps over there but shut down the factory because of too much government interference.
Meanwhile, Stellantis used to make Jeeps over there but shut down the factory because of too much government interference.
6PKRTSE
Well-Known Member
Just like all castings. These do have alot of porosity issues. Also, keep in mind, both China and Korea now have a city called USA so they can put made in USA labels on their products.
- Local time
- 12:58 AM
- Joined
- Mar 14, 2012
- Messages
- 19,171
- Reaction score
- 39,664
- Location
- Surrey, B.C. Canada
Where are these cities, I hadn't heard of them. Japan does have a city named USA, but it goes back hundreds of years. Products have to have country of origin on them, not cities of origin.
DanielSlocum
Well-Known Member
I agree with that,but Edy is in California i believe where everything costs too much. Perhaps its an American company having these intakes made in China as i think 440 source does with their quite good stroker kits?
Last edited by a moderator:
Lefty71
Well-Known Member
Its marked "Edelbroke"
dodgeboy440
BOHNALITE CHRYSLER HEMI PROTOTYPE 1951
- Local time
- 12:58 AM
- Joined
- Sep 10, 2013
- Messages
- 1,123
- Reaction score
- 1,836
- Location
- las vegas nevada
You Choose To be however YoU want ….It's cool cept when they drill all the holes to mount the intake in the wrong spots and you have to grind out a $400+ intake to make it fit the engine... my RPM was like that and i believe it was PBR that got 3 victor intakes with the same issue....
I will never not be pissed bout this
Personally In over 50+ Years of Hot Rodding
I have Never Had Fitment issues With Any Intake ……. No Matter Where It Came From !
Hilborn / Edelbrock / Weiand / Speedway /
AND
I personally rate Edelbrock As One Of The
Highest Quality Manufacturers Of All The
Gearhead Goodies I Can Afford !
It’s My 2Cents & I’m Sticking To It !
Mopar2ya! & Quit You’re Bitchin…..
John
Moved to Mississippi:
Edelbrock, LLC locating headquarters in Olive Branch | Mississippi Development Authority
Maybe a couple of things still in California...Tech Center and Foundries
EDELBROCK TODAY
Edelbrock LLC and its Distribution Center is headquartered in Olive Branch, Mississippi, along with the Edelbrock Group family of brands that include COMP Cams, FAST - Fuel Air Spark Technology, TCI Automotive, Russell Performance and Lunati Power. Edelbrock’s Southern California R&D Tech Center is in Cerritos, CA, with the Edelbrock Foundries located in San Jacinto, CA. Edelbrock Group has two facilities in North Carolina: the Edelbrock Carburetor Division in Sanford, and the Edelbrock Race Center in Mooresville.https://www.edelbrock.com/about-us/
Similar threads
