Does these Poly Strut Rod Bushings look correct?

[chargersb71]

These look drastically different then my original ones. Was just wanting some clarification before I went thru with mounting and bolting these. The way the retainers are turned are the way I removed when disassembling.

 

[UKPlymouth]

I'm waiting for mine to arrive from Summit, but those look similar to what I ordered.

 

[kb67mopar]

Look correct to me.

 

[Plucked Chicken]

Flip your washers - to allow movement. Grease them up good with brake grease.

The down and dirty strut rod bushing install article.

 

[DART505]

Nothing in the link but cat converter info. How much should you tighten the nuts on the bushing side? I had bought the prothane ones I think they were called..

 

[Nacho-RT74]

Flip your washers - to allow movement. Grease them up good with brake grease.

The down and dirty strut rod bushing install article.

View attachment 149906

View attachment 149907

As far I know the OP installed correctly those washers.

 

[PrescottJeff]

Dart505 you posted in a 12 year old thread. Kinda strange but not a big deal. As far as I know The torque is 105 ft. lbs.

 

[khryslerkid]

 

[RemCharger]

Dart505 you posted in a 12 year old thread. Kinda strange but not a big deal. As far as I know The torque is 105 ft. lbs.

Yes on the control arm side, but the bushing end was about 40. It's a course thread with a locking nut

 

[WileE]

They look as good as they did 12 years ago.