MOPIEMAN
Member
There is no fender tag. Also there's no stamp on the trunk lip in 68 only in 69 and 70.
Establishing a VIN number from the order number on radiator core support
- Thread starter MOPIEMAN
- Start date
MOPIEMAN
Member
But again can the radiator core support number be cross referenced to establish the VIN?
- Local time
- 4:58 PM
- Joined
- Jul 17, 2008
- Messages
- 22,058
- Reaction score
- 63,455
- Location
- South Jersey USA
not without a build sheet
MOPIEMAN
Member
I was not aware of this. I always assumed big block and small black k members were different...
- Local time
- 4:58 PM
- Joined
- Jul 17, 2008
- Messages
- 22,058
- Reaction score
- 63,455
- Location
- South Jersey USA
best we can do is X*29*8B******
Last edited:
YY1
Well-Known Member
...or an IBM card if it exists for his car and to get it from Stelantis, requires the VIN, and proof of ownership.
Chargers were XS29
- Local time
- 4:58 PM
- Joined
- Jul 17, 2008
- Messages
- 22,058
- Reaction score
- 63,455
- Location
- South Jersey USA
thanks....
they all has the "S"? ........ my GTX VIN, RS23L8A.... the "S" stands for "special".......I assumed only the Charger R/T would be XS.......
23 is two door hard top, Chargers are 29?
I have much more experience with RR/GTX and Bees........ I am not a Charger expert
66-70 were XS29.
You're correct, not all Chargers were the S special price class. Just using mine as an example along with the 29 designation.
Last edited:
That's incorrect. 68 had the same stamping on the trunk lip under weatherstripping that's also found on the radiator support......including mine.
MOPIEMAN
Member
Thanks for your help
MOPIEMAN
Member
All right I'll look again. Is it supposed to be on the driver side?
70 sublime
Well-Known Member
1968 Charger VIN started with XP29 for a regular Charger
XS29 was an R/T version
You could measure the diameter of the torsion bars in the car
Not sure of the sizes off the top of my head but the R/T had the heavier version as in fatter size
XS29 was an R/T version
You could measure the diameter of the torsion bars in the car
Not sure of the sizes off the top of my head but the R/T had the heavier version as in fatter size
MOPIEMAN
Member
Great idea. I will measure the torsion bars as soon as possible. Thank you.
- Local time
- 4:58 PM
- Joined
- Jul 17, 2008
- Messages
- 22,058
- Reaction score
- 63,455
- Location
- South Jersey USA
so I was right about this one?
70 sublime
Well-Known Member
S stands for special
P stands for premium which is all Chargers
P stands for premium which is all Chargers
MOPIEMAN
Member
So I just looked up the VIN decoder online and it says that this is an R/T version. Is that correct?
- Local time
- 4:58 PM
- Joined
- Jul 17, 2008
- Messages
- 22,058
- Reaction score
- 63,455
- Location
- South Jersey USA
Mine is. About the middle of the rail.
Benji
Well-Known Member
For title problems I suggest using Broadway Title www.broadwaytitle.com
There was a 1971 442 in a garage in an abandoned house that my mother bought at a sheriff's tax sale in 1999 and it had no title. It was not stolen but it was abandoned. Broadway title fixed me up with a title with the correct VIN.
There was a 1971 442 in a garage in an abandoned house that my mother bought at a sheriff's tax sale in 1999 and it had no title. It was not stolen but it was abandoned. Broadway title fixed me up with a title with the correct VIN.
Similar threads
