Hemi valley head bolt tool

[Bird 426]

Just made this, don't know if it's offered somewhere. Didn't like the feel of a crows foot. Now I have to do the 90°/180° figuring thing. It's 2 " center to center.

 

[Fran Blacker]

Mac Tools sells them But they may not sell individual piece. I bought a single 40yrs ago. yours will work fine and probably cheaper.

 

[rickseeman]

If it's 2" and your torque wrench is 20" (to the center of the handle) then you would set your torque wrench to 90% of what you want with your gizmo sticking straight out.

 

[snakeoil24]

Snap on sells the wrench for 34.00

 

[Bird 426]

Thanks guys! My torque wrench is 14 1/2 " from head center to mid handle line. Plus the 2 " extension. I have watched 3 different videos on this, with the 90°/ 180°, or straight out. Geometry and Algebra were not ever my strong point, my teacher passed me with a D in algebra if I remember, because I was flunking. That was in the spring of '65, the last math course that I ever took.

 

[snakeoil24]

Don't feel bad I thought a "d" was a god send for algebra

 

[Bird 426]

Hey, I finally get it. Torque wrench centers X Torque that I want. Then that figure divided by center to center plus the length of the extension. 22-44-70

 

[rickseeman]

Turned 90 degrees it doesn't change torque.

 

[GTXDAN]

 

[Bird 426]

Yes, think that is how I did it. The 3 sets of numbers up there at the end are values at 25, 50, and 80 . Straight out, not at 90°.
Broke the weld on my homemade tool. Need to find out what the boxed extension above is called so that I can hit the tool guys for a real one.
Thank you!

 

[Fran Blacker]

3/8" Drive SAE Box-End Torque Adapters

Chrome finish for corrosion resistance and easy clean up

www.mactools.com

 

[Bird 426]

Torque wrench adapter.

 

[Bird 426]

Thank you. Off to Northern Tool tomorrow, seems that they carry it!

 

[not so famous bob]

Just made this, don't know if it's offered somewhere. Didn't like the feel of a crows foot. Now I have to do the 90°/180° figuring thing. It's 2 " center to center.

View attachment 1766231

did the same thing about 40 yrs ago , ended up dropping about 8-10 pounds on the torque reading <depends on the length of your box crowsfoot ...