ignition wiring help

[beanhead]

Aha! That's what I was leaning towards as well....and just for your own data files, the (-) side of the coil isn't tied directly to ground, that's why you read 0-volts between the coil primary terminals. When checking for voltage always have your negative probe on a good ground.
Enjoy your thanksgiving!

 

[texas69bee]

It runs!!!! Here is what was happening, the wire I was using to power the coil only had power in run, but no power in start. So I tracked down another wire with 12v in start, but none in run. Spliced those two together and now it starts and runs!

Thanks to everyone for your advice and assistance.

Congrats!!! Enjoy your Thanksgiving.