I installed all the bracketry and guess what, I just need to make a few minor adjustments 
My new stock stroke 400 build
- Thread starter qkcuda
- Start date
- Local time
- 3:43 PM
- Joined
- Jul 17, 2008
- Messages
- 23,272
- Reaction score
- 68,799
- Location
- South Jersey USA
I installed all the bracketry and guess what, I just need to make a few minor adjustments
it's a life style
The good news is that I don't have to change the intake!
I worked on the adjustments today. The A/C brackets were easy. Clearancing the manifold was a PITA. I didn't end up with much of the coil boss left, but enough so it will locate the front of the bracket so it can't swivel.
Last edited:
cdr
Well-Known Member
Just asking, is that torque converter with the weight on it correct for the balance job done on the crank ??
Actually we removed the weight from the converter and neutral balanced it. It does have a weight on the harmonic balancer and some Mallory in the rear counterweight.
I should mention that the KB pistons were significantly lighter than the stockers, which helped with the balance.
The last of the test fitting today, I hope. I took some more time finessing the fuel line, and installed all the A/C brackets and everything clears.
Don't forget another hose clamp at the carb...
Similar threads
