Radiator and related parts....where?

[carcrazyguy]

I need to find a new 26" radiator, factory appearing shroud and fan for my 71. Thought about going with aluminum and electric fans, however I decided I wanted more of the stock look. Any suggestions on where I can purchase the OEM look parts?

 

[70RR]

I found a 26" Mopar 1972 date coded Radiator for one of my 70RR's for $150 shipped and it was a working one on Ebay..I need 26" as car has A/C... They also list them here in this Forum but , they do go quick..You can buy look a like but, they cost they same or more than Mopar ones...Certain Radiators command big bucks...1969 type ending in 054 and 055..Fit 440 but, since they also fit a HEMI...Close to a grand!!
Another site is Moparts.com very similar to this site...Google Mopar Radiator and you will find a few sites that list the numbers so one you do find one you can look up what year and model it came off of if not listed in sellers ad...Good Luck Rick 70 RR

 

[mattsinger]

is it a big block or a small block car? I have a stock radiator from a 72. was a 318 with A/C. I have the fan also, but no shroud. Let me know if that helps you.

 

[carcrazyguy]

The car is an original 318 car. It now has a mild 440 and will retain a/c! I really am not concerned with a numbers correct radiator. I just like the OE appearance more than an aluminum radiator for this build.

 

[Montclaire]

I used a 26 inch radiator from USRadiator.com, it cost $150 and was for a mid 70s van/pickup with a 318. Looked stock and bolted up like a glove in a 73 Challenger and cooled my 440 no problem. I was able to get a matching NOS shroud from a truck parts house for around $80 and used the MP clutch fan kit. I'll see if I can find the invoice on the shroud, it'll be a few days.

 

[JakeS]

Is it to far gone to have it re cored? It was pricey but i just had mine all redone for 500 and now the factory shroud fits.. I know with some of the replacements the factory shroud doesnt fit..