- Local time
- 12:04 PM
- Joined
- Feb 20, 2012
- Messages
- 66,305
- Reaction score
- 241,526
- Location
- Maskachusetts
Sad day for the Roadrunner…
- Thread starter Paul73
- Start date
davek
Well-Known Member
Update on the car.
Paul73
Well-Known Member
Yeah sorry I haven’t been updating this thread that much. It’s mostly just been sandblasting and painting small parts and resorting other used karts I got. I got a used dash harness from a buddy. He just gave it to me along with a new bulkhead connector. I’m not sure if I’m going to run it though because it’s used and I don’t want to have this incident happen again but there’s no burnt or shredded wires on it. It does need a new fuse box. If I do run it I will bypass the main wire going to the ammeter.
The paint on the engine bay looks bad but that’s due to the car sitting outside and dirt collecting in it. It looks really good underneath the dirt. Same for the inside of the car.
Next I need to put a new core support on the car because mine was damaged ever since I bought it.
As far as the engine goes, there no damage to it. I checked the cylinders with a bore scope. I will be putting in a bigger cam and some headers and an aluminum intake. Then I’ll touch up the paint.
Hoping to find a lot of odds and ends this coming weekend and the nats and hopefully get this car back together. I start college in two weeks so it wont be going together quickly but I’ll be home on the weekends to work on it.
Paul73
Well-Known Member
Last edited:
davek
Well-Known Member
Thanks for the update. These car never get done quick, Im on year 3. 
Paul73
Well-Known Member
Update: now getting ready to swing the engine and trans back in the car. I was going to get this done last night but I ran into a snag with the pilot bushing I ordered. The bushing was about thirty thousandths too big so I had order a new one.
Got my dash mostly complete. Still need to get a lower pad. I got a really good used wiring harness that I put a new bulkhead connector on and cleaned up the rest of the connectors and checked for any shredded wires. The ammeter didn’t work so I got a volt meter from eBay that I took apart and integrated into the original cluster.
Got my dash mostly complete. Still need to get a lower pad. I got a really good used wiring harness that I put a new bulkhead connector on and cleaned up the rest of the connectors and checked for any shredded wires. The ammeter didn’t work so I got a volt meter from eBay that I took apart and integrated into the original cluster.
Last edited:
Paul73
Well-Known Member
More:
It probably didn't seem that way to you, but that was fast work. Great job!
Paul73
Well-Known Member
I was just thinking to myself that this incident happened only four months ago! Feels way longer than that.
threewood
Well-Known Member
Paul, countersink the hex bolt heads into the motor mounts. If they stick up they will interfere.
Paul73
Well-Known Member
Got it, will do.
Paul what a BEAUTY and the Phoenix rises from the ashes. Love this bird!!!
Coelacanth
Well-Known Member
- Local time
- 11:04 AM
- Joined
- May 10, 2024
- Messages
- 731
- Reaction score
- 1,034
- Location
- Edmonton, Alberta, Canada
This is a true labor of love, it's great to see. Too bad this wasn't Christine. "Show me."
Paul73
Well-Known Member
Well that would have been too easy.
Well that would have been too easy.
Paul73
Well-Known Member
Fixed the motor mount
Paul73
Well-Known Member
Made some progress on the road runner over the last couple weeks. Got the engine and transmission back in with a new wiring harness, dash somewhat complete, door panels and put the front end back together. Today I got it to start up and run for a minute. Still needs some fine tuning but I’m just happy to hear it runs again. Now I just have to put the steering column back together, get a windshield, finish the interior and get an exhaust system and button up a few small things.
Also if anyone has a turn signal switch and hood springs for sale, please send me a pm. I will also post in the wtb section.
Also if anyone has a turn signal switch and hood springs for sale, please send me a pm. I will also post in the wtb section.
davek
Well-Known Member
Looking good 
Nice! Happy to seeing it come back to life!
Similar threads
