Sniper 2 throttle cable linkage, b body. 1969 Dodge charger

[kaj750]

As the title states, I'm installing a sniper 2 onto my 1969 Dodge charger.
The plate and post, I guess you call it, from my carburetor does not seem to work on the sniper setup.
What is everybody using for the throttle cable and kick down on b-body? I did a search and only found results for an e-body.
Thanks in advance!

 

[kiwigtx]

I'm running the Lokar throttle cable and bracket for the Sniper.

I received one of the first ones off the production line - Holley are a bit slow at making stuff for Mopar.

Lokar XTCB-40HS Lokar Throttle Cable Brackets | Summit Racing

Lokar cable....
Lokar TC-1000U96 Lokar Hi-Tech Throttle Cables | Summit Racing

Yes you read it right...my throttle cable is 96" long - and it's still about 6" too short for my liking. They don't make 'em big any more.

 

[69ChargerR/TSE]

As the title states, I'm installing a sniper 2 onto my 1969 Dodge charger.
The plate and post, I guess you call it, from my carburetor does not seem to work on the sniper setup.
What is everybody using for the throttle cable and kick down on b-body? I did a search and only found results for an e-body.
Thanks in advance!
View attachment 1644033View attachment 1644034

I’m running the Sniper Stealth EFI, on a CH4B intake, and using stock linkage, with the second adapter.

 

[kaj750]

I’m running the Sniper Stealth EFI, on a CH4B intake, and using stock linkage, with the second adapter.

View attachment 1644110

View attachment 1644111

Ah ha. I need one of those:

 

[69ChargerR/TSE]

Ah ha. I need one of those:

View attachment 1644305

Yes
Let me know if you need more photos.

 

[69ChargerR/TSE]

More showing the washers on the lower bolt for alignment.

 

[kaj750]

Yes
Let me know if you need more photos.

View attachment 1644752

View attachment 1644753

That should be fine, thank you. I just gotta figure out which bracket it is and where to find one.

 

[kiwigtx]

That should be fine, thank you. I just gotta figure out which bracket it is and where to find one.

Holley 20-7 Holley Throttle Lever Extensions | Summit Racing

You're

 

[kaj750]

I found this laying around. Seems to work. Will test for on the car ASAP.

 

[kaj750]

For anyone wondering, this is a Holly carburetor for b body Chrysler. For reference, I have a 440 with a 727 transmission.

 

[andyf]

I make some throttle brackets for Sniper installs. I also make some other parts such as the thermostat spacer with a CTS port.

Throttle Bracket Kits | AR Engineering

 

[kaj750]

I make some throttle brackets for Sniper installs. I also make some other parts such as the thermostat spacer with a CTS port.

Throttle Bracket Kits | AR Engineering

Nice! I'll take a look and see if I can figure out which I need for my throttle and trans cables.