• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

The not a meme meme thread

Status
Not open for further replies.
images.jpg
 
Well good luck without it working on your Challengers and Chargers made in Bramladesh (Brampton, Ontario)...pass the 18mm.
20221130_143736.jpg
 
Last edited:
1669862659580.png

Both sizes advertised on this German tool. But face it, it would cost too much to change the 1/4-3/8-1/2" standard now.
 
What, nobody has the new Universal socket set? Sockets are SAE on one end, and Metric on the other. Still time to get a set for your favourite mechanic for Christmas. LOL.
 
I do have an impact socket set that has no "duplicate" sizes, IE where the SAE and metric sizes are the same- there is ONE socket labeled for both!

It was $15 at a yard sale and is a complete auto store brand 3/8 shallow and 1/2 deep impact set with extensions and adapters.

I kind of freaked out when I got it home and saw the somewhat bizarre methodology.
 
OK @joe m

What do you disagree with?

The fact that I own a socket set as described, or the fact that I freaked out?
 
I do have an impact socket set that has no "duplicate" sizes, IE where the SAE and metric sizes are the same- there is ONE socket labeled for both!

It was $15 at a yard sale and is a complete auto store brand 3/8 shallow and 1/2 deep impact set with extensions and adapters.

I kind of freaked out when I got it home and saw the somewhat bizarre methodology.
The both one is 11/16" and 17mm.:thumbsup:
 
Status
Not open for further replies.
Auto Transport Service
Back
Top