Trick flow heads valve train

[Rob Vaughn]

Lol street

 

[andyf]

Don't know if this will help or not but I wrote a ton of tech articles on the Trick Flow heads. I think I covered everything on those heads including everything you are asking about: http://arengineering.com/tech/

 

[Rob Vaughn]

Don't know if this will help or not but I wrote a ton of tech articles on the Trick Flow heads. I think I covered everything on those heads including everything you are asking about: http://arengineering.com/tech/[/ Yeah that helps a lot, lot of great information There thank you. I'm actually heading up the summit right now a friend mine told me he seen a set of competition Cam rollers on the bargain shelf

 

[beanhead]

1st off, techlines are notoriously staffed by morons.
2nd, you are not attempting to use totally stock components.
3rd, Dad told me I needed to be smarter than my cylinder heads.
4th, 57 years ago Dad placed a sticker on the steering wheel of our Bonneville car, it read, "If at first you don't succeed, READ THE INSTRUCTIONS!" So........that is what I did, before I installed the first set of Trick Flow heads.

Yes, I am a smart-***. I got that way when I passed 70 years.

Wisdom to live by. We had my gramps version of #3 in the restaurant growing up, except it was "be smarter than the turkey; it's dead afterall"..

 

[m79ded]

What did your pushrod length end up?

I will dig out the paperwork because I don't remember off hand, I got them from Manton.