What's it Worth Truck 440 exhaust manifolds

[Kern Dog]

Good news and bad news…..they are worth some decent cash, probably about $260 for the pair, but I’ll ask my brother about that. He is seriously into Ramchargers. Anyway, the bad news is that you should be listing them on the many Facebook gen 2 dodge truck and Ramcharger sites. And cleaning them up would go a loooong way towards getting top dollar for them. If you’re on FB, look up member “Mike Slay”, he and another friend of mine are the foremost buyers and sellers of parts for trucks and Rammy’s, and they would undoubtably buy them.

Thank you for reaching out.
On principle, I will not use facebook for anything. I refuse to support anything associated with that corrupt organization.

 

[RJ Squirrel]

I have a set of those too, I think I will stick them in my molasses tank and clean them up, that worked great on my HP manifolds I used on the 440.
I agree about Face f%&ck I have never been on there either.

 

[6PKRTSE]

I have several pair of those somewhere also. Along with the matching engine block mounts, oil pans and pick up tubes. I should package them all up for someone looking to big block their trucks.

 

[RemCharger]

I have several pair of those somewhere also. Along with the matching engine block mounts, oil pans and pick up tubes. I should package them all up for someone looking to big block their trucks.

I've done that, also the block plug, the drivers frame mount stop, the heat shields

 

[Kern Dog]

I've done that, also the block plug, the drivers frame mount stop, the heat shields

The "what" ?? I don't know what those are.

 

[RemCharger]

The "what" ?? I don't know what those are.

The plug goes in the dipstick hole, there's a bracket that hits the frame in case the mount breaks, and there's shields for the mounts as well as the stove pipe shields.

 

[Kern Dog]

My truck did have that block off plug for the dipstick hole and the oil pan that had the dipstick going through it but I don't recall those other things. I'll have to take a closer look. I don't know what you mean by the "stove pipe shields" but they may have been removed before I got the truck.
Thank you.

 

[Cop car wagon]

Now I feel sad. I have the manifolds all ready to go for my swap, and a spare pair, cause why? Typical mopar guy.
And if I could find a good set of tri y headers, I wouldn't even use the first pair

 

[eldubb440]

I think I have a pair of them up in Dubb's loft.

 

[cosgig]

Thank you for reaching out.
On principle, I will not use facebook for anything. I refuse to support anything associated with that corrupt organization.

I have a set of those too, I think I will stick them in my molasses tank and clean them up, that worked great on my HP manifolds I used on the 440.
I agree about Face f%&ck I have never been on there either.

You don’t have to like Facebook to take advantage of the Marketplace. If you want the best chance to sell the manifolds, that is the place to do it. You go to your target audience, because obviously they aren’t coming to you. To not use the best tool for your sale is just short sighted. I don’t see how taking advantage or using Marketplace endorses or supports any agenda. But, be it what it is, I guess you can keep your listing active on FTO and hope the 67 people on there somehow think they need them.

 

[Kern Dog]

You must have missed where I wrote that I will probably keep them.
If you don't understand how using some corrupt organization furthers their strength and influence, I guess you'd think that standing in the rain wouldn't get you wet either. Using the site to interact with other users would make a connection that wouldn't happen without that evil platform.
I'm not desperate to sell anything. Even if I was, I am not one to sell out just to make things easier.