What did you do to your Mopar today?

[watermelon]

what cal. ?

looks like 45-70


i found a missing nut/washer at point where passenger side exhaust manifold meets exhaust flange area. im happy about that cause i didnt know if i had some else going on.



watermelon

 

[T2R9]

Trim time. Got the restored Power Wagon emblems on. Tri City rechromed front bumper installed, and wet sanding all the upper trim. At 400 grit right now but will go to 1500 before I start buffing.

 

[hanks73340]

With the help of my mechanic friend, finished installing a new Fitech 30003 Go Street 400 HP EFI on the car. Man...what a difference. Love it..... The wife really likes how it takes off from a dead stop or traffic light.

 

[dadsbee]

It doesn't get much more original than this...

 

[Larrry B.]

BEST MONDAY MORNING EVER.

Headed out around just after 4:30 am, got back around 5:45.
According to Mapquest approx 76.9 miles.

Early enough with very little traffic on the 101 and 405 fwy, passing most (all) people all the way to PCH.
PCH north to Kanan was great, no traffic at all with light just beginning to break once I hit Malibu.
Kanan Dume Rd. was fun, had to really tighten up the belt on the bench seat.
Car handled great, once I'm able to get the Procar buckets and harness in it should really pin me in my seat.
Once I complete the steering & suspension upgrades completely, I'm hoping for even better results especially with 18" real performance tires on the car.

Now to go and shoot at paper and metal targets that are trying to get my Mopar.

 

[conv67bdere]

Been working inside the car, the bottom is done, and applying the bed-liner and paint to the trunk and cab area of the car . . .

Quite happy with how this panel area turned out . . .

 

[Hey-O]

Been working inside the car, the bottom is done, and applying the bed-liner and paint to the trunk and cab area of the car . . .

View attachment 773129

Quite happy with how this panel area turned out . . .

View attachment 773130

Well done!!! Looks Great!!

 

[moparwacko]

Took a short ride, then buff n fluff

Pondering an offer.......
I've owned it for 26+ years, don't know if I could.

 

[NJRR]

Swapped my bench seat for buckets. Who can see how I screwed up????

 

[Fran Blacker]

Look to upright.

 

[NJRR]

Look to upright.

Why though?

 

[dadsbee]

Forgot the spacer blocks on the front bolts..

 

[Fran Blacker]

Why though?

Bolted to floor no seat tracks?

 

[NJRR]

Forgot the spacer blocks on the front bolts..

Nope

 

[NJRR]

Bolted to floor no seat tracks?

Nope, can see the tracks in the pics if you zoom in.

 

[MrJLR]

Nope, can see the tracks in the pics if you zoom in.

Ok...out with it!

Jeff

 

[BDF6]

I drove around in mine also, BUT have NOT topped off fuel the last 2 drives. Getting ready to do some work on 'things'.

Pondering an offer.......

I think you'll have SELLER'S REMORSE!

 

[Mike Szadaj]

Forgot seat belts

 

[NJRR]

Ok...out with it!

Jeff

LOL. OK. I put the tracks in backwards, narrow part towards the front. So two things are wrong. They're pitched forward and they don't move back all the way. I'm not a tall guy but only a little person could drive it as is. Easy fix though.

 

[NJRR]

Forgot seat belts

Didn't forget them, just don't have a set for buckets yet. Think my bench seat belts will work?