What did you do to your Mopar today?

[Cranky]

Okay you are ahead of me. Keep it up your doing great

Did the doors over 20 years ago when I was still driving it lol. Even did some Lexan but I think they were too thin to roll down and up right.

 

[bearman]

What about the package tray does that get done also.

 

[themechanic]

View attachment 887106
One side leaded in, took awhile, learning.

That is where mine was leaking on both sides through tiny pinholes.

 

[Ceedawg]

That is where mine was leaking on both sides through tiny pinholes.

Double primed and seam sealer in all the edges

 

[Andew Sury]

I blew the dead bugs off my Hemi with compressed air. Oh, cleaned the rubber off the quarter panels too.

 

[66383]

Sumtin like dis?

View attachment 887403

Reminds me of the "swiss cheese" Pontiac from the 60's>

 

[71charger_fan]

Wrapped an extra dash insert for the '71 in carbon fiber-look vinyl.

 

[Cranky]

I blew the dead bugs off my Hemi with compressed air. Oh, cleaned the rubber off the quarter panels too.

I usually left any rubber on mine....kinda a badge of honor Looks like I'll be taking a couple of days off from working on the car unless it rains. Got this to finish up.

 

[moparnation74]

Just basked in the memories from MCACN.......I had a "fitting" show spot number......

 

[BDF6]

Took a deep breath, appologized (kinda, then ran away for a bit) to wife & ordered a Silver Sport 4 speed/OD automatic transmission.
I'm getting to old & worn out to piece things together &
HATE down time.
I'll be right on @Dennis H 's tail next time...

 

[Brandon4401968]

Took the satellite out today after putting the new
wheels and tires on.
Back- Wheel vintiques 63 series 15x10 4.75 back space with M/T E/T street SS 295/55/15.
Front- Wheel vintiques 63 series 15x7 4.25 back space with BFGoodrich radial T/A 225/70/15.
I personally love the look, couldn't be happier.

 

[Stephen Hotz]

Took the satellite out today after putting the new
wheels and tires on.
Back- Wheel vintiques 63 series 15x10 4.75 back space with M/T E/T street SS 295/55/15.
Front- Wheel vintiques 63 series 15x7 4.25 back space with BFGoodrich radial T/A 225/70/15.
I personally love the look, couldn't be happier.

View attachment 888745

Looks tough.

 

[moparnation74]

Took the satellite out today after putting the new
wheels and tires on.
Back- Wheel vintiques 63 series 15x10 4.75 back space with M/T E/T street SS 295/55/15.
Front- Wheel vintiques 63 series 15x7 4.25 back space with BFGoodrich radial T/A 225/70/15.
I personally love the look, couldn't be happier.

View attachment 888745

Nice ride!....Love the overall look, great job!

 

[Brandon4401968]

Nice ride!....Love the overall look, great job!

Thank you It cost me two sets of rear wheels to find out what would work to get the biggest tire I could in the factory wheel well. Haha

 

[MrJLR]

Took the satellite out today after putting the new
wheels and tires on.
Back- Wheel vintiques 63 series 15x10 4.75 back space with M/T E/T street SS 295/55/15.
Front- Wheel vintiques 63 series 15x7 4.25 back space with BFGoodrich radial T/A 225/70/15.
I personally love the look, couldn't be happier.

View attachment 888745

Roadrunner, Satellite or GTX..... I'll take the Satellite. ....personal preference i guess......
Thats beautiful! Feel free to post more pics!

Jeff

 

[Cranky]

Still doing the downed tree work but managed to drill a couple more holes in the lower door hinge between rain storms today. Gots to do some cleanup grinding on part of where I used the plasma cutter but that shouldn't take too long. It's wild at how much time it takes to lighten stuff up but now a days that's how it is. Would do it anyways but the difference now is that I'm on my own time and not the companies

 

[70chall440]

thought about several of them a few times... LOL sorry, couldn't resist.. In reality, nothing... but I would argue that planning is working, so in that vein I did some planning for my RR.

 

[Brandy]

Closing up trim holes. Finalizing interior scheme. I have settled on the interior colors and styles. Pics attached. The top section of each door panel ( above the door card top edge and the chrome trim) will be black Ultra Leather. The bottom 3" tall section ( below the door card bottom edge) will also be black leather.
The door card will be split into three sections with the center section being perforated leather. The color is Ultra Leather Adobe. There will be 3/16 depth between each section. the lower section of the three will have a chrome trim line ( reusing the rear door panel upper door card trim) that is indented 3/16" in the center of that panel ( left to right) beginning from the rear edge of the door card and extending towards the speaker grill. About 6" or so along that line of trim there will be a oval Edel Italian Luxury Yacht Deck Light trimmed in chrome that is centered over the chrome door trim.
The pic below shows the idea of how that will look although it has a round light on it. The speaker grill will be black. The door armrest will be recolored in black. The dash top will be recolored in black down to the top of the wood grain insert line. The A/C vents will be removed, the wood trim removed leaving a long narrow 3 1/2" section all across the dash from door to door. This will have a fabricated 3 1/2" panel with a slight curve (bow out) all along it and covered in a wood grain veneer sticker. I will place a "CORONET" script on the right end, centered in that narrow panel.
The narrow panel will continue around into the door and the speaker/door lock/door handle unit and then out into the wood grain insert. Below that narrow panel everything will be recovered in the Adobe leather including the knee panel below the steering wheel, the center console body, the glove box door section and both end pieces. The seats will be in Adobe Ultra leather with black control panels and adjustment knobs. The E brake handle & armrest above it will be Adobe leather with black base. The carpet will be black. Headliner black, Roadster panels Adobe Ultra leather while the Satellite rear seat topper at the head of those roadster panels will get repainted black. The center medallion are in Adobe leather. No headrests. Everything under the Roadster panel ( backseat area) will be black carpet/fabric. The rear quarter panels door cards will be reused without the trim. Steering wheel will get sprayed black. Chrome OEM windshield trim front and back reused. The 2020 Ferrari Gt California is my inspiration...#7 pic...

 

[Brandy]

 

[DeltaV]

Rolled them ('70 Charger 500 & '79 300)
outdoors while I built these shelving units.

...and still have a few more things to do before they are ready for duty.