WTB WTB - Plastic headlight bump outs

[TT from NH]

I accidentally broke the plastic bump out/spacer for the headlight in my 68 Coronet. I can buy a used complete set of 8 with other hardward for $35 (including shipping) on eBay (1968 dodge coronet headlight hardware plastic bump out pegs spacers grille 68 | eBay) but I only need one or two. Anyone have a spare laying around?

 

[MWbirdLOVER70]

See if you can buy two at a bodyshop

 

[RemCharger]

Some c bodies around then had them

 

[moparsaver]

I accidentally broke the plastic bump out/spacer for the headlight in my 68 Coronet. I can buy a used complete set of 8 with other hardward for $35 (including shipping) on eBay (1968 dodge coronet headlight hardware plastic bump out pegs spacers grille 68 | eBay) but I only need one or two. Anyone have a spare laying around?

@moparmendy

Want to sell TT from NH 1 or 2?

 

[RemCharger]

Lol
Post in thread 'Rivets in fenders?' Rivets in fenders?

 

[TT from NH]

See if you can buy two at a bodyshop

Good suggestion. Thanks!

 

[EARLY B]

What is the length you need?

 

[TT from NH]

What is the length you need?

Sorry for the delay; I’m out of town and will get you a measurement by week’s end. Thanks!

 

[TT from NH]

It looks like the spacer is 1 1/8" long.

 

[TT from NH]

Sorry for the delay; I’m out of town and will get you a measurement by week’s end. Thanks!

@EARLY B I wasn't sure if you saw my answer to your question. Thanks for any help you can give. Terry

 

[EARLY B]

use this number for a photo reference@EARLY B I wasn't sure if you saw my answer to your question. Thanks for any help you can give. Terry

Try Restoration Specialities call 1-814-467-9842 use part #8420 as your descriptioin and then tell them the length you need. Or you can go to webb site and search. Part # 8420 is too short. You could also use this part by cutting and epoxy two pieces to gether to get the correct length.