Search results for query: *

Pull out by hand I squirted a little WD40 in, let that set for about 15 minutes and pulled them out pretty easy. Mine are 69 RR and has a two piece rod. The end with the mounting bracket cam out by hand. I used vicegrips on the other end after removing the rubber tip.

I believe I figured out how to mount the brackets and bushings from Energy Solutions. It probably seems obvious when you look at the attached picture but it wasn't to me.

Thanks, I believe that bushings for original brackets are available so let me know. If you do have them, a picture would be most helpful.

Anybody know where I can get some original type brackets/bushings for a front sway bar. I have a 69 Road Runner and have tried after market brackets with bushings from Energy Suspension which are supposed to fit but the don't seem to line up with the holes in the cross member after I removed the...

Thanks. There are no nuts so maybe they are just missing. Sorry the attached picture is blurry but I think you can see well enough. Just pop em out, right?

I want to replace the 383 hood emblems on my 69 Road Runner. Does anyone know how to remove them? They have tapered studs and I'm thinking you have to tap them out but don't want to mess them up.

I want to replace the 383 hood emblems on my 69 Road Runner. Does anyone know how to remove them? They have tapered studs and I'm thinking you have to tap them out but don't want to mess them up.

69 Road Runner

Thanks for the help.

I'm looking for some tips on how to get the lower dash on my 69 Road Runner apart so I can get to the switches. I'm having a problem with lights that I think is caused by the headlight switch. The dash lights that run off the dimmer, front parking lights and tailights all quit working after I...

Thanks for the information. I'm having trouble installing a fan shroud and suspect the fan is not correct. From what I found, the 2863224 fan is 18" which helps.

I'm having some cooling problems with my 69 Roadrunner 383 and suspect it does not have the right fan. Can anyone tell me what the diameter and number of blades should be on the stock fan?