Search results for query: *

1969 Superbee Turn Signal Lever. Original $55

Hello, I have a stock 426 Hemi with 4 speed A833 trans. going in to my 71 Super Bee. My assembly manual states the Hemi cars use a .390 inch diameter spring wire size. Using a traditional Borg & Beck stock style clutch set-up purchased from Brewers. I have a .360" spring, will it make a big...

I think I have one

A couple months ago I did this on an E body for a customer. Was a lot of time/work but not too difficult. Second side did go a lot faster for sure. I hope you realize you'll also have to relocate the leaf springs to put wider tires on. At least on an E body.

383/440 Waterpump Pulley Non AC $40

From the home page: Established in 2001, and based in Ontario Canada, the 1970 Dodge Charger Registry is here to help document as many 1970 Dodge Chargers as possible. Those that are still in existence, and those gone to the great car graveyard. The registry is free and open to all 1970 Dodge...

I've use a soapy Scotch-brite pad to freshen up the edge of the wiper blades, but I'll have to try out the WD40 cleaning trick next. I also used Rain X years ago, but I found that it didn't last long.

Here are the dyno numbers for the 426 Hemi built stock except solid lifters for my 71 Super Bee. 422HP @5700 RPM 445 Torque @ 3400 RPM A/F ratio running on the rich side, did not have a great selection of metering rods at the time. Will change out the metering rods once it is in the car and...

383/440 Waterpump Pulley Non AC. Powdercoated $60

I have made some progress on my mini tubbing project. When I cut away the floor back to the frame rail it requires you to cut the flange on the frame rail. I was worried about compromising the strength of the frame rail in that area. So what I came up with was to open up the floor to gain access...

Yes! I even got an organizer with it with al the original papers in it. It was sold by Chrysler Belgium. It was repainted, but I think I like this color better.

That emblem is like gold. Lol. Grew upon that area right off Woodward Avenue. Lot of history behind that emblem and the high and mighty!! Great history.

For seat belts these guys are great and they're just up the road from me about 20 miles. I bought a few sets from them. They'll customize if you call...

Yeh, I think I will keep mine, they are pretty handy in the rain.

Thanks Roger. Mechanically, just about everything under the hood and on the exterior is done. Going to recruit a friend to help me with installing the front bumper/grille assembly after the new year. Things I still have to get are; Trunk mount battery kit & wiring 3-point seat belts Stereo...

Not all advice is good advice !! Sometimes you have to look at what others have done and adjust your actions based on that. Looks good to me !!

Evans Wiring Harnesses 1970 Big/Small Block Engine Harness New. Points ignition. $75

Rain-X also makes a Windex type product. Cleans and leaves a repellant residue. Works well. I buy my wipers at thrift stores for n average of $3 each. A few months ago, I bought a tub larger than a 5 gallon bucket full for for $5 at a yard sale. Only 3 were used, the rest new. Mostly 2000's...

There was Muscle Machines in Barnes and Nobel yesterday. Jan. 2025. Line was out the door, Stole it. LOL.