ckessel
Well-Known Member
Try strips of duct tape or maybe a magnet.
62 Belvedere 318 poly granny cruiser (one day i hope)
- Thread starter icetech
- Start date
icetech
Well-Known Member
Since it's 24 degrees out i went to get some antifreeze for the car this morning (it's in the garage so not worried bout it being water right now) And just a FYI.. walmart has normal non 50/50 AF for $10.88 a gallon... which seemed to be a decent deal.
icetech
Well-Known Member
Master cyl swapped, steering column back in.. waiting on the pump to test it.. recurved the dist again.. and.... #7 cyl has a header leak so bad it might as well not have a gasket... so much for $60 Percy gaskets that you can use over and over.. 1 time.. that's a fix for another day, done for now.
icetech
Well-Known Member
Ok.... power steering is on other than the lines... done for tonight though. Belt alignment isn't as good as i would like.. modified it a bit but not enough.. will just pray it doesn't throw belts.. if it does i'll fix it..
This is the bergman kit btw......
This is the bergman kit btw......
icetech
Well-Known Member
Just posting a couple of better pics in case anyone does this kit and needs to figure out the spacers (have to space the pump back off the bracket) Also cut the welded on nut off the lowest bracket that goes to the 2 timing cover bolts so the bracket will go over the back of it..
Last edited:
Looking great! Is that car originally from Ferndale Michigan?
icetech
Well-Known Member
Frankenmuth.. spent it's entire life there. parked in 78 til a few years ago.
Hmmm not sure why the emblem on the back says Ferndale.. gonna look at the original receipt when i get home.
icetech
Well-Known Member
k.. i had never considered it.. but a quick search for "Masons auto ferndale 1960s" got me this...
icetech
Well-Known Member
K.. wow i had never thought to look into it.. Seems Masons sponsored racers in this are starting in 1960... and one guy posted that the ramchargers started there... Glad i kept that emblem.. gonna be going back on now
icetech
Well-Known Member
This Car Changed Drag Racing: The Ramchargers' High & Mighty
Built by a group of young Chrysler engineers from the remains of a rusted-out ’49 Plymouth business coupe, The High & Mighty changed the sport of drag racing forever. Note: One of the great things about this business is … Continue reading →
www.macsmotorcitygarage.com
That emblem is like gold. Lol. Grew upon that area right off Woodward Avenue. Lot of history behind that emblem and the high and mighty!! Great history.
icetech
Well-Known Member
yeah i didn't know anything bout masons.. i grew up at the 8/van dyke area.. 1 of the mounting pegs is broken off the emblem. Will find a good way to mount it
Went to South elementary 11 mile and mound area. Owned a store on Stephens and Hoover. And one on 12 and groesbeck. Played hockey at Warren ice arena, Fraser etc. remember any of those?
icetech
Well-Known Member
yeah.. that's where i grew up... hoover and stephens was a 7-11 wasn't it? I used to go to the family store bout 2 blocks north of 9 mile, the one with the kegs sticking out the side of the building... Went to centerline though
- Local time
- 10:53 PM
- Joined
- Mar 10, 2010
- Messages
- 30,944
- Reaction score
- 55,165
- Location
- Hanover, Pennslyvania
Here's a member who restores pot metal...
Post in thread 'After Rebadging' After Rebadging
Where did you buy the Bergman kit? I saw 440 source sells brackets also.
- Local time
- 10:53 PM
- Joined
- Dec 25, 2011
- Messages
- 5,657
- Reaction score
- 6,995
- Location
- White Cloud, MI
I'm kinda bored here (Christmas at home) so I just read your entire thread. I went through a similar situation with my 65 Belvedere. It is waiting for the trim shop to finish the interior and then I can continue with the debugging (24 miles so far) process. I started in 2009 and it should be done in 2025!
I applaud your perseverance and attitude. This can be a maddening hobby but, it is satisfying to resurrect old machinery.
Now, will there be another?
Mike
I applaud your perseverance and attitude. This can be a maddening hobby but, it is satisfying to resurrect old machinery.
Now, will there be another?
Mike
Similar threads
