Search results for query: *

I apologize. I didn't know if was full. I have made room.

I know this is an older post, but are those diaphrams available?

Well I have Covid-19. Got it from work. Here's what happened prior to the covid. After I pulled out the engine and trans, I completely dismantled the 440. It was not good. I new it was full of sludge, but way worse than I expected. Once I got it apart I was starting to realize that I was...

I figured it out. The flap is supposed to be on the top. So I pulled the staples and put it on the top.

Whats with this flap on the back? Is that for Rallye dashes? I have a standard dash. I don't see how the flap can stay on with installing the cardboard box. Am I missing something?

Does anyone know where to locate the fuse panel on a 61 Dart?

1972 Rallye Taillights

Muggy weld

I currently have the wiring harness, the turn signal stalk, the cable clamp, and the bracket that bolts to the master. I believe all I need is the servo, throttle cable, speedometer cables, and servo bracket. I believe there is another bracket that bolts to the intake that I need as well.

I'm looking for a Servo Bracket for my 72 Charger Cruise control. Also interested in any other parts associated with the Cruise Control system. Thank you.

Well the suspension upgrade has snowballed out of control. I made a cart for the driveline and removed it last weekend. The cart cost me around $50 to make. I used HSS 1 1/4" tubing that I got from work. Along with the plate. Worked just fine. I was a little nervous lifting the body up 5 feet...

Thought I would offer up what I ended up doing. I clipped off the bullet connector that ran to the trunk latch and put the proper spade connector. I ended up mounting the switch inside the glove box. It works great! And I did concur that this is in fact a factory trunk release correct for 72...

I got some quasmolie from Resto Rick . Haven't used it yet.

I used a window seal kit from Classic Industries. They worked out pretty well. Idk the manufacturer, but made in the USA was on the box.

Well I tore the front suspension apart. Got some parts on order. Also placed an order with Resto-Rick for some quasmolie paint. The driver's side was pretty bad. Definitely was not driveable. The strut rod was missing the spacer between the bushings and was bent. The shock was bent and all...

Thanks for the help. I have a set of Energy Suspension black 7/8 on order.

I have read allot of posts about upgrades, but that's not what I'm going for with this application. I have a 72 Charger with a factory front anti-sway bar. It is a 7/8" bar. I have researched bushings and there seems to be only a few options. 1) Moog split rubber bushings. a) seem to be a...

Is the 72 bar straight in the middle? My came with one but it was missing when I got it.