1969 Plymouth Roadrunner Restoration
- Thread starter Sabre_3
- Start date
Sabre_3
Well-Known Member
You know that right!
I'm already coming up with "clever " ways to store my cap that maximizes the open space I have without compromising the buildings structural integrity.
Semper Fi
Sabre_3
Sabre_3
Well-Known Member
Outstanding!
I gotta text Clay to see if I can physically get to him today to pick up that A833 Transmission
Semper Fi
Sabre_3
Sabre_3
Well-Known Member
Ok....I’ve got updates,
Bought the A833 from Clay and Sons! It came with a Hurst control assembly with overdrive.
Clay gave me a deal on a Bell housing too.
I've done some decoding. Double check me and see if I'm close.
Main Case:
C-99129: 307 Bearing/23 Spline
VIN Pad: PP8335674 - Might need a little help
5674 - does this mean the main Case was cast on the 56th day of 1974?
Tail housing:
C-99539: E Body and B Body
Take a peek at the pics.
Bought the A833 from Clay and Sons! It came with a Hurst control assembly with overdrive.
Clay gave me a deal on a Bell housing too.
I've done some decoding. Double check me and see if I'm close.
Main Case:
C-99129: 307 Bearing/23 Spline
VIN Pad: PP8335674 - Might need a little help
5674 - does this mean the main Case was cast on the 56th day of 1974?
Tail housing:
C-99539: E Body and B Body
Take a peek at the pics.
- Local time
- 7:46 PM
- Joined
- Jan 29, 2018
- Messages
- 22,927
- Reaction score
- 82,967
- Location
- Midland Ontario, Canada
10000 day calender...
Day 5674 is Tuesday, February 8, 1977
Day 5674 is Tuesday, February 8, 1977
I like the idea of a zerk fitting on the shifter body.
Sabre_3
Well-Known Member
Thank you very much!
Sabre_3
Well-Known Member
Ok...Starting with Priority 1 Stuff (Prepping the Roadrunner for Acid Dipping).
Starting at the rear of the car; here's what I did yesterday:
1. Rear Quarter Panel Extensions - carefully photographed, removed, inventoried, catalog missing fasteners, recorded number stamps, cleaned, wrapped, labeled and boxed.
2. Tail Light Assemblies-
carefully photographed, disassembled, inventoried, catalog missing fasteners, recorded number stamps, cleaned, wrapped, labeled and boxed.
The Left Hand tail light assy. is different from the Right. Hand tail light assy. (See pics below). Is the LH assy. Broken and "repaired" or is this common?
3. Trunk Deck Lid- carefully photographed, removed, inventoried, cataloged rust and sheet metal issues and staged.on saw horses for further prep work.
I'm seeing patterns with the numbers I'm pulling off the parts. Hopefully this is a good thing.
Starting at the rear of the car; here's what I did yesterday:
1. Rear Quarter Panel Extensions - carefully photographed, removed, inventoried, catalog missing fasteners, recorded number stamps, cleaned, wrapped, labeled and boxed.
2. Tail Light Assemblies-
carefully photographed, disassembled, inventoried, catalog missing fasteners, recorded number stamps, cleaned, wrapped, labeled and boxed.
The Left Hand tail light assy. is different from the Right. Hand tail light assy. (See pics below). Is the LH assy. Broken and "repaired" or is this common?
3. Trunk Deck Lid- carefully photographed, removed, inventoried, cataloged rust and sheet metal issues and staged.on saw horses for further prep work.
I'm seeing patterns with the numbers I'm pulling off the parts. Hopefully this is a good thing.
Similar threads
- Locked
