70 Hemi Superbird Restoration..................errr.....scratch that........

[69 GTX]

http://www.dragracecarparts.co/ here's a good site for buying parts. They have a make a offer tab that you can counter off their price. I generally get 5-7% off their stated price. Free shipping over 100$ orders and they will drop ship for you if you want. 90% of the time cheaper than Jegs/Summit

 

[Hemirunner]

http://www.dragracecarparts.co/ here's a good site for buying parts. They have a make a offer tab that you can counter off their price. I generally get 5-7% off their stated price. Free shipping over 100$ orders and they will drop ship for you if you want. 90% of the time cheaper than Jegs/Summit

Cool site. Might have buy my Jesel belt drive off of there.

 

[69 GTX]

I bought a lot through them. Not always the cheapest, but was most of the time. My order from Tues. arrive yesterday

 

[Hemirunner]

 

[Hemirunner]

 

[Hemirunner]

 

[69 GTX]

Engine ****!!!!

 

[Hemirunner]

Engine ****!!!!

Who doesn't love that?!

I got the Indy heads cleaned up. If I can't sell them, I'll run them.

Block is all clean and ready. I
Ordered rod and main bearings. Coated Clevite H bearings.
Oliver 6.800 BBMX connecting rods.

Need to order pistons this week and once I have those, I can put the crankshaft on order.

 

[69 GTX]

Stroker? Not like you really need it though with boost.

 

[Hemirunner]

Got the coil supports and puke can fittings welded on the valve covers. Dropped them off to have the Powdercoating redone.

 

[HEMI-ITIS]

I have found that Todd at Marsch Performance to have good prices on parts.He is also an engine buider with years of MOPAR experience!! http://www.mopartsracing.com/ and tell him HEMI-ITIS sent ya

 

[Hemirunner]

Stroker? Not like you really need it though with boost.

540 inch. 4.500 bore x 4.250 stroke. 6.800 rod

 

[Gpuller]

Are you going to make your own bushing for the cam sensor? SD Concepts has them if not.

http://sdconcepts.com/cam_position_sensor_bushings.html

 

[Hemirunner]

I have found that Todd at Marsch Performance to have good prices on parts.He is also an engine buider with years of MOPAR experience!! http://www.mopartsracing.com/ and tell him HEMI-ITIS sent ya

I agree. Todd is a great guy and an awesome engine builder.

 

[Hemirunner]

Are you going to make your own bushing for the cam sensor? SD Concepts has them if not.

http://sdconcepts.com/cam_position_sensor_bushings.html

Yeah I saw those. I'm going to shorten the cam synch first and then making my own bushing. Might just make a new housing.

 

[HEMI-ITIS]

I'm roots blown,carbed on gas.4.5 X 4.385.Ran great for 5 years till I pushed my luck.Still have plenty of room to grow for "next" time.

 

[69 GTX]

Rods or valve springs?

 

[Hemirunner]

Fresh powdercoat!

 

[daytona kid]

Sweet!

 

[usaroadrunner]

Fresh powdercoat!

Sexy, very sexy