• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Any Jeep folks here?

They all do it here.
It's not real popular out here, but I have gotten several
on older Jeeps or Cjs, some they just set on the hood too
while parked in Safeway parking lot

2020 Gladiator Rubicon - 11-30-2022 1st day 010.JPG


None in/or on the Gladiator/Rubicon Launch Edition (debadged) 'yet'
but it's locked all the time, that I'm away from it or Dad's drive's driving it
to the dr's etc.

Smiley Jeep Wave Level EXPERT.jpg
 
Last edited:
Neighbors Jeep/68 CJ5 Kaiser/Willys, a few month before done
I helped & guided to rebuild/restore to how his parents had it, $16k later
except for it had 33" tires not the 31.5", soon to be changed too
adding some stainless acorn nuts to the wheels too
a lil' bling (think A12)
Darrens 68 Jeep CJ5 photos Attachments 9-19-2016.JPG
 
or JUST EXCHANGE EXPENSIVE PARTS
That Works Too !
You’ll Find out when you wheel it in a dry
Rocky River bed …..
KaaRaaCrunch..

PS
4.0 Six Banger Tip…My 2000 TJ Was loosing
Oil pressure ….it would be fine at 1500rpm &
Up , but at idle it was almost zero….???
Guess what !
The Oil Pump Was an alloy housing with cast iron gears . And For some reason it would lose tolerance….& not pump like it should.
I replaced the oil pump with a OEM Melling Cast Iron Pump & Mucho & Gusto Oil pressure !
So if…..you start having oil pressure issues check your pump !
Mopar2ya
John


It’s A Jeep Thang….
 
I'm getting 60 PSI at idle with my 4.6 stroker and Melling stock oil pump. (60-ish miles on the engine so far.)
 
Auto Transport Service
Back
Top