Bracket suggestions?

[ozzy_567]

Hello! New to the forums! I recently put a different water pump housing on my 1966 Charger. It came off another 383 engine. I have a alternator bracket that would fit with the old housing, but the holes don't line up now with the other housing. Any suggestions for a bracket that would line up correctly? Orange is the new housing on the charger and blue is the old one I took off. Thank you in advance!

 

[1 Wild R/T]

First go here..
Water Pump Housings from www.440 Source.com
And you'll learn all about water pump housings..

Then goes here..
Hoffman's Winners Electrical System Related
And you'll find the bracket you need

 

[R413]

Post a wanted and for an alternator bracket.

1967 and newer non AC.

 

[ozzy_567]

First go here..
Water Pump Housings from www.440 Source.com
And you'll learn all about water pump housings..

Then goes here..
Hoffman's Winners Electrical System Related
And you'll find the bracket you need

Thank you I think I found the one I'm looking for!

 

[ozzy_567]

Post a wanted and for an alternator bracket.

1967 and newer non AC.

Thank you for the reply! I think I found the correct one I was looking for.

 

[gkent]

Just clean up the old housing and put it back on then put the new "water pump" into that housing. Zero cost involved and probably quicker than waiting for parts to arrive !!

 

[ozzy_567]

The old housing has a hairline crack and one of the slots to screw in the bracket is broken unfortunately.

 

[gkent]

Ah, I see !