DeltaV's '70 Charger 500; The Omen

[DeltaV]

Wiring loom covers along door sills.

SUMMARY: The driver and passenger side gaps are different from one another.

Driver's Side:
1.78 inch gap between the two loom covers.

2.00 inch gap between the rear loom cover and the rear wheel tub.

*******
Passenger Side:
1.60 inch gap between the two loom covers.

2.25 inch gap between the rear loom cover and the rear wheel tub.

=================================

Driver's Side pictures:

***

Passenger Side pictures:

 

[davek]

Get the dash harness,easy to install with dash in car. Ive done 3 that way. Ok I lied its a pita. buy doable.

 

[DynaBro]

2004 BMW X5 E53 chassis with the N62 4.4 liter DOHC V-8 and ZF 6 speed steptronic transmission.

I drove those for years on end. Was the cheapest decent 4wd vehicle you could get in MN. Mostly all they ever need was a coolant system overhaul that runs about $1400 with RockAuto parts and I could beat on them for a few good years until the suspension was shot from city driving and then sell them for nearly what I paid. But I did have the moon roof stick a couple times and once that happens you learn to never open it again.

 

[DeltaV]

Someone was asking about the license plate light assembly in a different thread.

Here's mine:

 

[DeltaV]

What is this funky bracket on the passenger side; behind the rear axle and somewhat adjacent to the gas tank?

Did @Kern Dog have a thread a few years ago about this bracket?

 

[eldubb440]

???? must be a charger only thing

 

[Kern Dog]

I think it is a guard for the gas tank to exhaust pipe on dual exhaust cars?

 

[DeltaV]

Underside of hood mounted turn signal indicators for reference if anyone is interested.

Driver's side:

Passenger's side:

 

[DeltaV]

I think it is a guard for the gas tank to exhaust pipe on dual exhaust cars?

There isn't one on the driver's side and my car came with factory dual exhaust.

 

[Kern Dog]

Oh, here is another idea…
Charger only.
To prevent the tank from moving too far to the right and dislodging the filler neck in the event of a side impact?

 

[DeltaV]

Well, it is removable. I'll look in my parts book and see if I can find it.

 

[DeltaV]

Front face of the radiator support. Black of course.

Driver's side:

Passenger's side:

 

[RSMS]

Looks like a fun project!!

 

[davek]

What is this funky bracket on the passenger side; behind the rear axle and somewhat adjacent to the gas tank?

Did @Kern Dog have a thread a few years ago about this bracket?

View attachment 1828752

View attachment 1828753

View attachment 1828754

View attachment 1828755

Wayne,thats on my charger too,@Kern Dog was it on your two cars? Im thinking it make sense on the gas tank ideal.

 

[Kern Dog]

This was removed from my Jigsaw Charger when I replaced part of the trunk floor.

 

[RemCharger]

Well, it is removable. I'll look in my parts book and see if I can find it.

 

[DeltaV]

I'm over an hour away from home on a shopping mission.

 

[kiwigtx]

View attachment 1829007

This was removed from my Jigsaw Charger when I replaced part of the trunk floor.

View attachment 1829008

View attachment 1829009

View attachment 1829023

View attachment 1829006

It must be a Charger thing - I have never seen one....and I have had 2 x '70 Road Runner's and the '70 GTX.

 

[Kern Dog]

The 1970 had the evaporative emissions vacuum lines too, at least the ones built with California emission equipment. They had this tube in the right side too:

 

[davek]

What is this funky bracket on the passenger side; behind the rear axle and somewhat adjacent to the gas tank?

Did @Kern Dog have a thread a few years ago about this bracket?

View attachment 1828752

View attachment 1828753

View attachment 1828754

View attachment 1828755

@Richard Cranium , @6PKRTSE , @6pktgo
is this also on the 68? Do you know the name of it?