• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

help decoding my 318

mrdeeds

Member
Local time
8:44 AM
Joined
Jan 30, 2012
Messages
13
Reaction score
0
Location
london, united kingdom
hey all

418938_10150501688837021_579727020_9055800_1045097713_n.jpg


ive looked all over the web to decode what i think is a 318 i bought my b body from a museum in the uk the owner just had her imported but never registered etc. the car was from mexico still has Mexican plates i believe it was assembled in mexico (has a small plate next to the battery reading something about negative battery terminal in Spanish?, the cars had a hard life in the wrong hands at some point due to half of the work done on it lol :( as you would notice the charger like fuel filler fitted in the photo....

anyhow to my main point ive been through all sorts of decoding mopar engine websites but still a little confused

so far what i have found:

-2bbl
-100% the engine is not original to the car
-it has 318 stamped under the drivers head
-date stamp 15.5.73 so 1973 engine
-727 transmission
-engine has a front sump with the drain plug at the front of the sump also were the drain plug is a square has been cut out of the front subframe to access the drain plug:confused:
-drivers side of the engine block near the date stamp under the head just above the starter all i found was this number C30618 if that makes sense to anyone
-passenger side of the engine nothing but a clock of what shift it was built on


another strange thing is the engine mounts have been cut and shaped to fit the engine and bolt to the car?? very bad job

i couldnt find a vin number all i found is a small plate riveted to the door shut of the drivers door under the top door hinge it reads

LA904604
LA9104604

i will get some photos up when i get in from work when i can to show what my issues are im sure someone will be more clued up then i am yet on mopars

any help appreciated

many thanks in advance!

zack:dance:
 
sorry for the delay guys these are all the number i could find all over the engine

also a photo of the sump dont know if it helps but the subframe has been cut out for the sump plug drain?

423957_10150542387427021_579727020_9167337_646010728_n.jpg


429487_10150542387077021_579727020_9167336_1711606300_n.jpg


423212_10150542387822021_579727020_9167338_1143322151_n.jpg


419733_10150542388767021_579727020_9167339_53866142_n.jpg


431190_10150542389642021_579727020_9167341_2042804206_n.jpg
 
Last edited:
also this is the axle fitted to the rear i believe correct me if im wrong its a 9 3/4'' axle normally for 440 magnum 440 six pack and 4 speed hemi's?

396443_10150542451702021_579727020_9167431_2001936481_n.jpg
 
Auto Transport Service
Back
Top