tonyp25
Well-Known Member
Managed to puncture my old gas tank so I replaced it today. The fuel line was fairly new and so is the pump. Got all new gaskets and seals but reused fuel sending unit. The fuel gauge works fine still but I can’t get gas to the carb.
I tried pouring some gas in the carb as I have someone turn the ignition a bunch of times. It starts for a second and putters out. I also tried a little compressed air in the tank, while someone poured gas and another started it. Still not luck.
Next I guess I’m going to pull the fuel line off and connect the pump to a can just to make sure it works but not sure how to prime the line if it is working. Anything I might be missing?
I tried pouring some gas in the carb as I have someone turn the ignition a bunch of times. It starts for a second and putters out. I also tried a little compressed air in the tank, while someone poured gas and another started it. Still not luck.
Next I guess I’m going to pull the fuel line off and connect the pump to a can just to make sure it works but not sure how to prime the line if it is working. Anything I might be missing?