Pitman arm- 1970 GTX

[EV2 GTX]

Hey guys..

I'm looking for a pitman arm for my 70 gtx...big block (440) with power steering.

It looks like Moog doesn't have them, my parts guys say it doesn't show in their books. I'm a little surprised as I was able to get all new Moog parts for the front end, other than this.
I was wondering if any of you have any experience finding these and if they're a good fit. Mine is pretty well mashed and it's the only front end part that I need, to rebuild my front end.

Any help you can provide would be greatly appreciated!

Thanks!

 

[GetX'd]

I bought one for my 68 off Summit Racing site. Fit was fine - all is good. I've noticed with Moog that sometimes when you go to a local parts store their book says they don't have it. You give them a part number and they can order it from Moog - cause they do have it.

 

[Photon440]

If you're going to replace the pitman arm, why not go a little further and replace both the pitman arm and idler arm with a fast ratio set-up. This is what the AAR Cuda's and T/A Challengers used. But not if you have headers... These are from PST.

http://www.ebay.com/itm/Fast-Ratio-...r_Truck_Parts_Accessories&hash=item2eb8c6382a

 

[EV2 GTX]

Thanks guys...

I'll check into the summitt site as I can't seem to find a Moog part number anywhere.

Photon....that would be an option other than the header issue...I'll need the stock fit.

 

[Cranky]

Had headers on my 71 340 and the pitman cleared fine. Most don't know that all 340 powered E cars in 71 also came with the fast ratio setup. 2.5 turns lock to lock!

 

[EV2 GTX]

Had headers on my 71 340 and the pitman cleared fine. Most don't know that all 340 powered E cars in 71 also came with the fast ratio setup. 2.5 turns lock to lock!

Interesting was that for 71 only?