Pro Flo 4. Edelbrock

[moparedtn]

Utoh….

 

[Dennis H]

1 week to aquire fuel lines.

 

[1967coronet440]

What lines did you go with?

 

[Dennis H]

What lines did you go with?

3/8. Metal.

 

[Dennis H]

Nothing to report. And this confirms that the reality shows with one week deadlines etc are total bullshit.

 

[Derwud]

Oh, yes I can tell you for sure, 110 percent bullshit..

 

[5.7 hemi]

So what seems to be the major malfunction?

 

[Dennis H]

Filler neck tube misaligned. Custom tank from Ricks Tanks more capacity. Needs modification.

 

[Dennis H]

 

[5.7 hemi]

Heat that bitch up and put a slight bend in it.

 

[1967coronet440]

Seems Nothing ever goes together like it should

 

[themechanic]

You might consider an in-floor access panel like the ones sold by Tanks Inc. so you won't have to drop the tank to change anything.

http://www.tanksinc.com/index.cfm/p...t_id=544/category_id=146/mode=prod/prd544.htm

 

[watermelon]

slice it and get some nice neck filler rubber elbow so it can flex down a bit. looks like it is almost there.

I didn't know those things filled at the bumper



watermelon

 

[Dennis H]

6 weeks. Separation anxiety. Fall Fling slipping away.

 

[Dennis H]

You might consider an in-floor access panel like the ones sold by Tanks Inc. so you won't have to drop the tank to change anything.

http://www.tanksinc.com/index.cfm/p...t_id=544/category_id=146/mode=prod/prd544.htm

View attachment 666339

Got one from Detroit Speed. First thing on the list. Unable to fab it due to location of pump access and floor configuration. Will work on another access door.
See post 83.

 

[Darius]

Just remember, EVERYTHING is bolt on............AFTER you **** with it enough!!!

 

[Dennis H]

 

[Derwud]

Looks AWESOME, can't wait for a driving report...

 

[5.7 hemi]

So how did you fix the filler neck?

 

[Dennis H]

Shop says it was running today. Don’t know the specifics of the filler tube fix.