So the Dawg was looking for some pics...

[cr8crshr]

Of my ride so here ya go. These are of the Engine after my 3rd re-build. 440 Source Heads, Edlebrock Performer Intake, HP exhaust, etc. A Holley 750 dual feed Vacuum Secondary carb will sit on top. Tomorrow the engine will be going back into the car so more pics to follow...cr8crshr/Tuck:blob1::blob1::blob1::blob1:

 

[tpodwdog]

GOOD LAWWWWWWWWWWWWWWWWWWWWD THATS PURDYYYYYYYYYYYYYYY... no headers.......atta boy... we think alike i see ! WOOOOOOOOOOOOOO thanx for these....love em...nice'n' cleannnnnnnnnnnnn!:headbang:

 

[cr8crshr]

Thanks

Nope no headers for me on this one. It started out as a budget build but you know how that goes...Like 3 re-builds to get it right...:angryfire: But we do now. I am runnin' a TTI 2 1/2 inch exhaust with the HP Manifolds that I got used for a real deal. This car is more of a cruiser with a real attitude. Got 3:90-1 gears with the 727TF and stock stall. I like driving them and I am a little long in the tooth to be starting running the drag strips. But road courses??? You Bet. Here some more for ya to drool over....Tuck:headbang::headbang::headbang:

 

[tpodwdog]

dam that looks fan-freekin-tastik ...everything looks brandy new...i cant understand why ya havin probs. i got the same master cylinder on my '66 Belvy II. yotta lemmee stripe that thing up fer ya! heres my '66View attachment 2nd import 007.jpg

 

[HT413]

Man, both those cars sure are purdy. Clean aint even the word.

 

[383man]

That looks nice !!! Ron

 

[MikeyT]

Looks awesome! Well done.

Mike

 

[Ron 73]

Looks like its a great one in the making! Hope you'll post some pictures when you finish everything.. Dog has a good looker there, love those stripes on it TPODWDOG...

 

[tpodwdog]

didnt mean to hi-jack tucks thread.....just wasnt sure if he ever seen my 66....i wanna see his on the road soon!i love it!

 

[shag766]

dam that looks fan-freekin-tastik ...everything looks brandy new...i cant understand why ya havin probs. i got the same master cylinder on my '66 Belvy II. yotta lemmee stripe that thing up fer ya! heres my '66View attachment 97173View attachment 97174

dog its a beauty. really like the emblem on the rear 1/4. subtle and different.

- - - Updated - - -

Nope no headers for me on this one. It started out as a budget build but you know how that goes...Like 3 re-builds to get it right...:angryfire: But we do now. I am runnin' a TTI 2 1/2 inch exhaust with the HP Manifolds that I got used for a real deal. This car is more of a cruiser with a real attitude. Got 3:90-1 gears with the 727TF and stock stall. I like driving them and I am a little long in the tooth to be starting running the drag strips. But road courses??? You Bet. Here some more for ya to drool over....Tuck:headbang::headbang::headbang:

sweet. i could only wish

 

[cr8crshr]

That is one SSSWWWWEEEETTTT!!!! Belvedere. I like the twin .50's out the back. Only problems have been the motor. Just a "FREAKIN" nightmare but I finally got it re-built the way I want it and not how my supposed builder expert did. Just too many built in failures. Thing I have learned is that it is always best to do it yourself. That way it is on you and not some other Schmuck that thinks he is a builder. Headin over to my Brothers house here in an hour to get started on putting it back in today and getting it wired up to fire up. More pics later...Tuck

 

[tpodwdog]

That is one SSSWWWWEEEETTTT!!!! Belvedere. I like the twin .50's out the back. Only problems have been the motor. Just a "FREAKIN" nightmare but I finally got it re-built the way I want it and not how my supposed builder expert did. Just too many built in failures. Thing I have learned is that it is always best to do it yourself. That way it is on you and not some other Schmuck that thinks he is a builder. Headin over to my Brothers house here in an hour to get started on putting it back in today and getting it wired up to fire up. More pics later...Tuck

thanx for the KUDOS. im a firm believer in doing it yourself. that way , you only have yourself to blame. get that car on the road...i wanna race ya! nice car Tuck !

 

[69a100]

....i wanna see his on the road soon!i love it!

Your not the only one! I also want to see it outta my garage, sorry bro.:tongue: Yea, it's going to be a sweet ride when all is said and done.

 

[kdtjb]

Nice, real nice

 

[Budnicks]

here's my unfinished hoopty

cr8crshr/Tuck looken' good...

 

[Moparsmitty]

Wow!!!!!!!!

 

[Kerplunk]

Nice!!! Any clearance issues with the HP manifolds and the valve covers?

 

[cr8crshr]

Nice!!! Any clearance issues with the HP manifolds and the valve covers?

Yep a little when they are on the motor. But I got them on first so they don't need to come off again.

- - - Updated - - -

:angryfire: Did not go as smoothly today as I had planned. Just couldn't get the block to marry up to the bell housing. Just as we thought we might have it, it would not mate up. Found out that the Poly Lock engine mounts are so Freakin good that I need to drop the drive shaft, loosen up the tranny mount and then set the engine in and marry the block back up the tranny. Not looking forward to crawling around on COLD CONCRETE either. Here are some pics of today. Engine bay is as it is currently compared to the earlier pics in this post. The Dude in the hat is my right hand partner...My Brother Jon aka: 69A100. Keeps me legit and on top of doing this build right...Thanks Bro...Your Big Bro:hello2:

 

[joshb1983]

looks good...is your car y-3 yellow gold? looks like the same color as mine...motor looks great..im building one similar to it right now..thinking about getting the same heads as you..are they expensive?i hope mine turns out as nice as your did...i like the hp manifolds they look good..i want a set for mine

 

[69a100]

looks good...is your car y-3 yellow gold?

I'll answer for him as I'm sure crshr won't know the code, as neither do I. It's called dafadill yellow, and now I can't find my 66 paint chip sheet. Gotta be here somewhere??????